Pitot Covers & Banners

Sort By:  
Pitot Tube Cover (small) (ASA-PTC-58)
Pitot Tube Cover
This pitot tube cover fits snugly over 5/8" pitot systems found on:

  • Cessna 300 series, 400 series, Citation, and Conquest;
  • Beech singles and twins;
  • Piper Navajo, Cheyenne, most G1000 Mirage, Matrix, and Meridians;
  • Mooneys;
  • Mitsubishi;
  • Lear jets; and
  • Cirrus airplanes.
Critical to safe operations, the cover keeps dirt, contamination, and insects from entering the pitot tube. A "remove before flight" streamer hangs off the cover as a prominent preflight reminder to pilots. The cover uses a heavy-duty plastic material; the 2" x 17" banner is bright red with white screen-printing for maximum visibility.
19,90€  Inc Tax
Pitot Tube Cover (large) (ASA-PTC-34)
Pitot Tube Cover (large)
This pitot tube cover fits snugly over 3/4" pitot systems, found on:
  • Cessna 150, 152, 172, 177, 182, 200 Series,
  • Skymaster, and
  • the Falcon jet.
Critical to safe operations, the cover keeps dirt, contamination, and insects from entering the pitot tube. A "remove before flight" streamer hangs off the cover as a prominent preflight reminder to pilots.

The cover uses a heavy-duty plastic material; the 2" x 17" banner is bright red with white screen-printing for maximum visibility.
19,90€  Inc Tax
Pitot Tube Cover (blade) (ASA-PTC-B)
Pitot Tube Cover (blade)
This pitot tube cover fits snugly over blade-type pitot systems typically found on:
  • Piper Cherokee,
  • Warrior, and
  • Arrow aircraft.
They are vented to prevent pressurization of the pitot-static system. Critical to safe operations, the cover keeps dirt, contamination, and insects from entering the pitot tube. A "remove before flight" streamer hangs off the cover as a prominent preflight reminder to pilots.

The cover uses a heavy-duty plastic material; the 2" x 17" banner is bright red with white screen-printing for maximum visibility.
20,50€  Inc Tax
Remove Before Flight Banner (ASA-RBF)
Remove Before Flight Banner
High visibility red streamer that can be fastened to anything that needs removing before flight.

A bright red heavy nylon banner that can be fastened to anything that needs removing before flight. Comes with a grommet and wire ring that can be attached to everything from gear pins to gust locks and pitot covers. Heavy duty vinyl is tear resistant.
13,90€  Inc Tax
Per Page      1 - 4 of 4
  • 1