Search

• CXL 3-1LW is a 0 dBd, vertically polarized, omnidirectional base station antenna for the 118 - 137 MHz civil aircraft band.
• The antenna is a broad-banded ½ λ dipole design, and it is equipped with our type “LW” mast mount, which is a lightweight, multi-purpose, epoxy-coated aluminium mounting bracket with stainless steel fittings.

• The antenna can be mounted on vertical or horizontal mast tubes, 16 to 54 mm in outer diameter. Further, the construction of the mount makes it possible to lead the cable either along the inside or on the outside of the mast tube.
• A conical glass fibre tube with very low wind-loading completely encloses the carefully designed radiating element to ensure long dependable service in all climates.
• To substantially reduce noise caused by atmospherical discharges, all metal parts in the antenna are DC-grounded.
• Consequently, the antenna shows a DC-short across the coaxial cable. CXL 3-1LW is a vibration-proof, lightweight, slim-line, corrosion resistant, modern style base station antenna.

Brochure:

The Comant CI-105 is broadband and rugged antenna designed for DME or transponder use. Antenna assembly encased in a glass reinforced polyester molded shell. Standard two stud mounting configuration. CI-105 includes a BNC connector.

• Frequency: 960-1220 MHz,
• VSWR: 1.5:1 Max 960-1220 MHz,
  1.3:1 Max 1025-1150 MHz,
• Polarization: Vertical,
• Radiation Pattern: Equivalent to a 1/4 wave stub,
• Impendance RF: 50 ohms,
• Resistance DC: Open Circuit,
• Power RF 2.5 KW Peak,
• Material: Molded Radome,
• Finish Polyurethane Enamel,
• Connector: BNC (female),
• Gasket: B10505,
• Temperature: -54°C to +55°C,
• Altitude: 21336 m (70.000 ft),
• Air Speed: 741 km/h TAS at 7620 m (400 Knots TAS at 25.000 ft.),
• FAA TSO: C66a, C74c,
• RTCA Environmental: DO-160C,

Dimensions:

• Height: 8.2 cm
• Weight: 100 g

The Procom ML 2-XR (model ML 2-XP4R/118-137) Avionic Mobile Antenna
Tunable by cutting within: 66- 175 MHz

• Black-chromed, conical stainless steel whip.
• Elegant transition between whip and mounting surface due to slim-line mount.
• 30° tiltable whip.
• Stainless steel X-mount with M6-thread whip-fastening system.
• Simple mounting exclusively with access from the outside.
• XP4-mount with 4 m cable and FME-connector (oblong).

• Frequency range: 118 to 136 MHz
• Type: 1/4 wawe
• Band Width: >=8 MHz
• Max. power: 200 W
• Gain: 0 dB iso
• VSWR: <=1.4
• Impedance: 50 ohms

Brochure:

Dimensions:
Height: 1.3 m
Weight: 240 g

• IC-A4,
• IC-A5,
• IC-A6, IC-A6E
• IC-A20,
• IC-A23,
• IC-A24, IC-A24E

Procom ML-1ZGP4R
The Procom ML 1-ZGP4R Avionic Mobile Antenna

• Stainless steel ZG-mount with M8 x 1-thread whip-fastening system.
• Simple mounting exclusively with access from the outside.
• ZGP4-mount: Permanently attached 4 m cable terminated with FME-connector.

• Model: ML 1-ZG
• Antenna Type: ¼ λ mobile whip antenna
• Frequency: Tunable by cutting within: 66…88 MHz,(Also applicable: 88…175 MHz)
• Impedance: Nom. 50 Ω
• Polarization: Vertical
• Gain: 0 dB (acc. to EIA RS-329-1)
• Bandwidth: ≥ 8 MHz @ SWR ≤ 2.0
• SWR: ≤ 1.3 @ f. res.
• Max. power: 250 W

• Materials
  • Whip: black-chromed stainless steel.
  • Spring: Black-chromed stainless steel.
  • Mount: Weather- and shockproof plastics Stainless steel
• Recommended installation torque: 7.5 ± 1 Nm
• Color: Black
• Height: approx. 1.1 m
• Weight: approx. 360 g
• Mounting 21 mm dia. hole

Brochure:

Dimensions:
Height: 1.1 m
Weight: 360 g

MA-82 Magnetic Antenna Base (BNC)
The Lafayette MA-82 magnetic base for BNC antenna is suitable for indoor or outdoor use. Soft water-proof fabric lined under the magnetic base prevent surfaces of being scratched. With female BNC connector on the base and male BNC connector on the cable.

Dimensions: d=82 mm
Weight: 460 g
Cable: Coaxial RG-58A/U
Cable Length: 5 m
Cable Connector: m BNC
Base Connector: f BNC

*antenna is not included!

• Bracket Window Coxial cable: RG-174U,
• Connector BNC,
• Cable length: 3 meters.

• Bracket Window Coxial cable: RG-174U,
• Connector SMA
• Cable length: 3 meters.

UHF (Female) for RF400
UHF connector female cable mount for RF400

Specifications:

UHF (Male) for RF400
UHF connector male cable mount for RF400.

Specifications:

Specifications:

FME male to BNC male adapter

FME MALE ADAPTER threaded to BNC

Specifications:

BNC (Female) Connector RG-58
BNC female panel mounting crimping type connector for RG-58U cable (roHS).

Specifications:

BNC (Male) Connector RG-58
BNC male crimping type connector for RG-58U cable (RoHS).

Specifications:

Coaxial Cable RF-400UF - LOW LOSS

Specifications:

Attenuation Table (dB per 100 meters)

• N connector (male) cable mount for RF-400UF
• UHF connector (female) cable mount for RF-400U
• UHF connector (male) cable mount for RF-400UF