Aircraft Accessories

Sort By:  
Icom IC-A220TSO (ICOM-A220TSO)

High-Quality Panel Mount Radio with Clear Visibility OLED Screen - TSO APPROVED

Certification:
TSO-C128a, TSO-C169a
The IC-A220 TSO version can be used as a primary VHF radio in general aviation (part 23) aircraft*. The IC-A220 TSO version is also accepted as an ETSO radio under the TSO/ETSO reciprocal acceptance policy.

Dimensions (W×H×D):
160 mm × 34 mm × 271 mm
(Projections not included)

Weight (approx.):
1.2 kg

Lead time:4 weeks

Brochure:


Manual:
PDF

1.999,00€  Inc Tax
Icom IC-A210E VHF Air Band Transceiver (ICOM-A210E)

Icom IC-A210E VHF Air Band Transceiver
Innovative Icom IC-A210E VHF Air Band Transceiver is easier to install and see in more places

Large, bright OLED display
A fixed mount VHF airband first! The IC-A210E has an organic light emitting diode (OLED) display. The OLED display emits light by itself and the display offers many advantages in brightness, vividness, high contrast, wide viewing angle and response time compared to a conventional display. In addition, the auto dimmer function adjusts the display for optimum brightness at day or night.

Easy channel selection
It’s fast and easy to select any of memory channels in the IC-A210E. The “flip-flop” arrow button switches between main and stand-by channels. The dualwatch function allows you to monitor two channels simultaneously. In addition, the auto stack memory stores the last 10 channels used and allows you to recall those channels easily.

GPS memory function
When connected to an external GPS receiver* equipped with an airport frequency database, the frequency data such as nearby airports can be transferred and made available in the IC-A210E.

12V/24 V DC power source
The built-in DC-DC converter accepts a 12/24 V DC power source. The IC-A210E is easily installed in most airplanes.

Intercom functions
The IC-A210E has a built-in voice activated intercom function allowing the pilot to talk with the copilot via the headset. The IC-A210E has adjustable audio level and squelch control functions.

Easy installation
The IC-A210E neatly fits inside the common mounting brackets used on most airplanes including Icom’s IC-A200. Two types of rear-panel adapters are included, allowing for streamlined plug-in connectivity.

8.33 kHz channel spacing
In addition to the widely used 25 kHz channel spacing, IC-A210E is also compatible with 8.33 kHz channel spacing.

    Other features:
    • 10 regular memory channels with a 6-character channel name,
    • 200 group memory channels (20 Ch×10 banks) with a channel tag,
    • One touch access to 121.5 MHz emergency frequency,
    • Side tone function for monitoring your voice with headset,
    • ANL (Automatic noise limiter) function reduces pulse type noise,
    • Remote control capability,
    • Time-out-timer,
    • PC programming capability,
    • Dial lock and panel lock,
    • Squelch test function,

    Specifications

    Frequency coverage:118.000 – 136.975 MHz
    Frequency spacing:25 kHz, 8.33 kHz
    Frequency stability:±1 ppm (0˚C to +40˚C)
    Operating temperature:–20˚C to +55˚C
    Antenna impedance:50 Ω
    Number of memory channels:10 regular memory, 200 group memory
    10 GPS, 10 auto stack (history) memory
    Power supply requirement:13.8 / 27.5 V DC (Negative ground)

    Transmitter:

    Output power:6 W typical (Carrier power)
    Spurious emission:Harmonics –36 dBm (30 MHz – 1 GHz)
    Except harmonics –46 dBm (30 MHz – 1 GHz)
    Modulation:85% (Max. 95%)

    Receiver:

    Intermediate frequencies:1st 38.85 MHz
    2nd 450 kHz
    Sensitivity AM:–101 dBm at 12 dB SINAD
    Selectivity:8.33 kHz ch. spacing 6 dB ±2.8 kHz
    25 kHz ch. spacing 6 dB ±8.5 kHz
    Spurious rejection:More than 70 dB
    Audio output power
    (at 10% distortion):
    External SP 5 W with a 4 Ω load
    Headphone 60 mW with a 500 Ω load


    Supplied Accessories:

    Rear panel adapter, MB-113

    Dimensions (W×H×D):
    160 mm × 34 mm × 271 mm
    (Projections not included)

    Weight (approx.):
    1.0 kg

    Brochure:


    Manual:

    1.199,00€  Inc Tax
    PolMar PL-760 VHF Air Band Transceiver (PL-760)

    PolMar PL-760 VHF Air Band Transceiver
    PolMar PL-760 VHF Air Band Transceiver is designed for experimental aircraft with limited panel space and requiring low power consumption, the PL-760 fits a standard 5.7 cm (2-1/4") instrument hole.

    With it’s built-in voice activated intercom with manual squelch control, the PL-760 has proven superior performance in the noisy environment that kit aircraft are known for. The PL-760 has a 5 Watt transmitter, a 11-33 V power supply, and com frequency range of 118.00 to 136.975 MHz.

    Technical Specifications

    General

    Frequency range:118.00 to 136.975MHz
    Channel spacing:25kHz
    Mode:AM (6A3)
    Memory channels:32
    Acceptable power supply:11.7V to 33Vdc (Negative ground only)
    Usable temp. range:20°C to +60°C
    Frequency stability:+/- 5ppm
    Current drain:TX: 3A(max), RX 0.8A(max), Standby: 300mA
    Dimensions:61 x 159 x 61 mm (W x D x H)
    Weight:430g
    Exposed dial face:56.4mm (2 1/4.5 inches)

    Transmitter

    Output power:5 W (carrier), 16W (pep)
    Modulation:small stage modulation
    Modulation limiting:85% to 100%
    Audio harmonics distortion:Less than 15% (at 85% modulation)
    Adjacent channel power:-70dBc
    Hum and noise ratio:More than 40dB
    Spurious emissions:-16 dBm or less
    Antenna impedance:50Ω

    Receiver

    Receive system:Double conversion superheterodyne
    Intermediate frequency:1st: 38.85MHz (Upper)
    2nd: 450kHz (Lower)
    Sensitivity (at 6dB S/N):Less than 1 uV
    Squelch sensitivity:0.5 uV (Threshold)
    Selectivity:More than ±8kHz (at 6dB)
    Less than ±25kHz (at 60dB)
    Spurious response rejection:More than 60dB
    Audio output power:More than 4W (at 4Ω)
    Side tone:More than 100mW (at 600Ω)
    Hum and noise:More than 30dB
    Audio output impedance:Ext. SP 4Ω (4 to 8Ω) Side tone 600Ω
    Spurious emissions:-57dBm or less

    Dimensions (W x D x H):
    61 mm x 159 mm x 61 mm

    Weight:
    430 g

    Brochure:

    User Manual:

    780,00€  Inc Tax
    Intercom HD-4000 (HD-4000)
    Intercom HD-2000
    TheFour way voice Activated Intercom HD-4000 allows communicatin between Pilot and Co-pilot within cockpit, Pilot/Co-pilot to the communication tower and Pilot/Co-pilot with passengers.

    Features:
    - Aircraft powered intercom input: 11-34 V DC
    - Optionally 9 V battery can be installed for up to 40 hours of operation
    - Supplied with 1.2 m power cord for aircraft with cigarette lighter socket
    - Voice activation to initiate communicatin
    - Compatibile with PTT switches
    - Fail safe radio communications allow pilot to hear and to respond to radio calls while intercom is off
    - Auxiliary audio input/output
    - Volume and squelch control for the variation of background noise
    - Compatible with most applicable environmental specifications

    Specifications:
    - Weight: 450 g
    - Input: 11-34 V DC (9V battery optionally)
    - Max current drain: 0.05 A
    168,48€  Inc Tax
    187,20€
    Comant CI-105 DME/Transponder Antenna (CI-105)
    Comant CI-105 DME/Transponder Antenna

    The Comant CI-105 is broadband and rugged antenna designed for DME or transponder use. Antenna assembly encased in a glass reinforced polyester molded shell. Standard two stud mounting configuration. CI-105 includes a BNC connector.

      Basic specifications:
      • Frequency: 960-1220 MHz,
      • VSWR: 1.5:1 Max 960-1220 MHz,
        1.3:1 Max 1025-1150 MHz,
      • Polarization: Vertical,
      • Radiation Pattern: Equivalent to a 1/4 wave stub,
      • Impendance RF: 50 ohms,
      • Resistance DC: Open Circuit,
      • Power RF 2.5 KW Peak,
      • Material: Molded Radome,
      • Finish Polyurethane Enamel,
      • Connector: BNC (female),
      • Gasket: B10505,
      • Temperature: -54°C to +55°C,
      • Altitude: 21336 m (70.000 ft),
      • Air Speed: 741 km/h TAS at 7620 m (400 Knots TAS at 25.000 ft.),
      • FAA TSO: C66a, C74c,
      • RTCA Environmental: DO-160C,


      Dimensions:

      • Height: 8.2 cm
      • Weight: 100 g
      178,00€  Inc Tax
      Procom ML 2-XP4R Avionic Mobile Antenna (ML-2XP4R)

      The Procom ML 2-XP4R Avionic Mobile Antenna

        Description:
        • Black-chromed, conical stainless steel whip.
        • Elegant transition between whip and mounting surface due to slim-line mount.
        • 30° tiltable whip.
        • Stainless steel X-mount with M6-thread whip-fastening system.
        • Simple mounting exclusively with access from the outside.
        • XP4-mount with 4 m cable and FME-connector (oblong).

          Specification:
          • Frequency range: 118 to 136 MHz
          • Type: 1/4 wawe
          • Band Width: >=8 MHz
          • Max. power: 200 W
          • Gain: 0 dB iso
          • VSWR: <=1.4
          • Impedance: 50 ohms

          Brochure:

          Dimensions:
          Height: 1.3 m
          Weight: 240 g

          72,00€  Inc Tax
          MGF Compact Suction (MNT-1812)

          Sport Mount - Compact Suction

          Product Description

          The Sport™ Mount - Compact Suction Cup is for pilots who want to mount their iPad or other device off a glass windshield or other smooth surface while using the least amount of space. This is especially useful when using the mount on a side window close to the pilot. Each of these mounts comes with a Generation 3 Sport™ Adapter. The adapter can tilt up to 90 degrees.

          The Sport Mount - Compact Suction Cup is the most versatile mounting solution for pilots that would like to install an device on almost any flat, smooth surface. The high strength suction cup twist and locks to provide a secure hold to the windshield or metal panel. For pilots looking for more articulation and distance from the iPad to the mounting surface, please check out the Sport Mount - Flex Suction.

          The mount is portable and can easily fit in your flight bag or can be positioned and left on-board. Perfect for owners and renters alike.

          Note: A MGF Device Holder is required to use this mount. If you do not already own one you can add one to your order of this mount.


          Compact Suction Features:
          PILOT INSTALLABLE
          Sport Mount - Compact Suction can be installed by any pilot in any aircraft.


          NO TOOLS REQUIRED
          Compact Suction can be installed onto any window or smooth surface with no tools.


          PREMIUM DESIGN
          Vibration minimized, all parts made of metal making it solid and durable.


          INFINITELY ADJUSTABLE
          Mount swivels 360° and tilts 90° providing infinite adjustment.


          360° ROTATION
          Rotate iPad/Device between landscape and portrait positions in-flight when mounted.

          MGF COMPATIBLE
          Quick Mount Adapter is compatible with any MGF Device Holder.



          Compact Suction Demonstration


          Compact Suction Construction:
          2. Made of true rubber, the suction cup is designed for years of use.4. Made out of a lightweight, high strength, composite material.
          1. This is a lift to lock suction cup mount with a multi-positional arm.3. Holds strong to any glass, plastic or similar smooth surface and provides a rigid and firm platform for positioning and holding the device.



          To position:
          2. Loosen the suction cup knob, position mount location, then tighten.4. Attach the Device Holder
          (Sold Separately) to the Sport Adapter.
          1. Press suction cup against smooth surface, press center button and lift lever to lock.3. Loosen sport adapter knob, position adapter to desired location of device, then tighten.

          Specifications:

          • Suction Cup Material - Rubber, plastic.
          • Sport Adapter Material - Aluminum.

          Other details:

          • Mount: Compact Suction Cup
          • Arm(s): None
          • Adapter: Sport Adapter - Tilt & Swivel
          • Options: Suction Cup Base

          Included components:

            Compact Suction Cup Base


            Generation 3 Sport Adapter





            More on MyGoFlight

            155,00€  Inc Tax
            MGF Flex Suction (MNT-1805)

            Sport Mount - Flex Suction

            Product Description
            MGF has quickly become the go to choice for pilots looking to mount their iPad and other electronics in the cockpit. MGF has used their years of experience, proprietary technology, and the highest quality materials to develop the strongest and most versatile mounting solution on the market.

            The Flex Suction has been designed to meet the needs of pilots and attaches securely to any glass windshield, side window, or other smooth surface.

            Note: A MGF Device Holder is required to use this mount. If you do not already own one you can add one to your order of this mount.

            Features:
            20 g CERTIFIED
            Flex Suction was tested to withstand a 20 g impact. To view the test results Click Here.

            PILOT INSTALLABLE
            Flex Suction can be installed by any pilot in any aircraft. Use the quick release suction cup to securily mount to glass or any other smooth surface.

            INFINITELY ADJUSTABLE
            Ball and socket ends and a ratcheting center provide infinite adjustment to height and position.


            360° ROTATION
            Rotate device between landscape and portrait positions in-flight when mounted.



            QUICK CONNECT
            This mount comes with a Gen 3 Sport Adapter which quickly connects to any MYGOFLIGHT device holder. Press both green buttons to remove.

            MOUNT ANY DEVICE
            From iPad to GoPro this mount can securely hold any device including iPad, iPhone, Android devices, Microsoft Surface, GoPro, Garmin GPS, and even more.


            Flex Suction Demonstration

            The Sport Mount - Flex Suction construction:
            • The arm is comprised of three independent joints, all adjustable and lockable from a single, centrally located, control knob.
            • The control knob joint is adjustable to 360° and the two end joints are mini-ball heads that are adjustable to 105°.
            • The suction cup attachment joint is a lockable socket which rotates 220°.
            • The control knob allows partial loosening for safe and precise device positioning.
            • No longer limited to fixed length, limited rotation RAM arms.
            • Takes all of the guess work out of mount size selection and problems of imprecise positioning.

            The mount is portable and can easily fit in your flight bag or can be positioned and left on-board. Perfect for owners and renters alike.

            To position:
            2. Attach the Device Holder
            (Sold Separately) to the Sport Adapter.
            4. Fine tune iPad/Tablet positioning, tighten control knob.
            1. Position and lock the suction cup to the glass or smooth surface, tighten the control knob. Be sure the glass or surface is clean, the base of the suction cup is clean, and the suction cup attachment socket runs vertically to assure hold and minimize vibration. Tighten the suction cup socket and control knob

            3. Loosen the control knob, position the iPad/Device.


            About The Suction Cup:
            • This is a lift to lock suction cup mount with a multi-positional arm.
            • Made of true rubber, the suction cup is designed for years of use.
            • The lift to lock suction cup is easy to use.
            • The suction cup holds strong to any glass, plastic or similar smooth surface and provides a rigid and firm platform for positioning and holding the device.
            • Made out of a lightweight, high strength, composite material.

            Other details:
            • Arm Extension: 8.89 cm (3.5") to 26.67cm (10.5"),
            • Arm Diameter: 1.91cm (3/4"),
            • Arm Material: Aluminum,
            • Suction Cup Diameter: 8.89cm (3.5"),
            • Suction Cup Material: Sport Adapter Diameter: 3.81cm (1.5"),
            • Sport Adapter Material: Aluminum,
            • Mount Weight: 393g (13.8oz).

            Included components:

              Compact Suction Cup Base


              Flex Arm (Max. Extension - 26.67cm (10.5") | Min. Extension - 8.26cm (3.25")Generation 3 Sport Adapter




              More on MyGoFlight

              155,00€  Inc Tax
              MGF Flex Double Suction (MNT-1815)

              Sport Mount - Flex Double Suction

              Product Description
              Sport Mount - Flex Double Suction - an INFINITELY articulating and adjustable arm with the ability to hold any iPad or other device. There is no other suction cup mount for a iPad/Device that does all that this unit does in a single, light-weight, easy to configure mount.

              This one mount can operate as a compact suction cup, allowing a close position to the glass of 3.25 inches. It can also operate as a standard suction cup mount extending to 10.5 inches. The Mount utilizes two suction cups which some FAA examiners feel is important for added security and redundancy in a mount. For individuals looking for just one suction cup check out our Sport Mount - Flex Suction.

              Specifications:

              • Suction Cup Material - Rubber, plastic.
              • Sport Adapter Material - Aluminum.

              Features:
              PILOT INSTALLABLE
              Sport Mount - Flex Double Suction can be installed by any pilot in any aircraft.


              NO TOOLS REQUIRED
              Compact Suction can be installed onto any window or smooth surface with no tools.


              INFINITELY ADJUSTABLE
              Ball and socket ends and a ratcheting center provide infinite adjustment to height and position.

              360° ROTATION
              Rotate device between landscape and portrait positions in-flight when mounted.



              Flex Suction Demonstration

              The Sport Mount - Flex Suction construction:
              2. The suction cup attachment joint is a lockable socket which rotates 220°.4. The control knob allows partial loosening for safe and precise device positioning.
              1. The arm is comprised of three independent joints, all adjustable and lockable from a single, centrally located, control knob.3. The control knob joint is adjustable to 360° and the two end joints are mini-ball heads that are adjustable to 105°.

              To position:
              2. Attach the Device Holder
              (Sold Separately) to the Sport Adapter.
              4. Fine tune iPad/Tablet positioning, tighten control knob.
              1. Position and lock the suction cup to the glass or smooth surface, tighten the control knob. Be sure the glass or surface is clean, the base of the suction cup is clean, and the suction cup attachment socket runs vertically to assure hold and minimize vibration. Tighten the suction cup socket and control knob

              3. Loosen the control knob, position the iPad/Device.


              Other Details:
              • Arm Extension: 8.89 cm (3.5") to 26.67cm (10.5"),
              • Arm Diameter: 1.91cm (3/4"),
              • Arm Material: Aluminum,
              • Suction Cup Diameter: 8.89cm (3.5") Each,
              • Suction Cup Material: Sport Adapter Diameter: 3.81cm (1.5"),
              • Sport Adapter Material: Aluminum,
              • Weight: 535g (1 lbs. 2.7 Oz.).

              Included components:

                Double Suction Cup Base


                Flex Arm (Max. Extension - 26.67cm (10.5") | Min. Extension - 8.26cm (3.25")Generation 3 Sport Adapter




                More on MyGoFlight

                211,00€  Inc Tax
                MGF Flex Yoke (MNT-1820)

                Sport Mount - Flex Yoke

                Product Description

                MGF has quickly become the go to choice for pilots looking to mount their iPad and other electronics in the cockpit. MYGOFLIGHT has used their years of experience, proprietary technology, and the highest quality materials to develop the strongest and most versatile mounting solution on the market.

                The Flex Yoke has been designed to meet the needs of pilots and attaches to any yoke shaft or any other bar from 1.59cm (5/8") to 3.81cm (1.5") in diameter.

                Note: A MGF Device Holder is required to use this mount. If you do not already own one you can add one to your order of this mount.

                Features:
                20 g CERTIFIED
                Flex Suction was tested to withstand a 20 g impact. To view the test results Click Here.

                PILOT INSTALLABLE
                Flex Suction can be installed by any pilot in any aircraft. Use the quick release suction cup to securily mount to glass or any other smooth surface.

                INFINITELY ADJUSTABLE
                Ball and socket ends and a ratcheting center provide infinite adjustment to height and position.

                360° ROTATION
                Rotate device between landscape and portrait positions in-flight when mounted.


                QUICK CONNECT
                This mount comes with a Gen 3 Sport Adapter which quickly connects to any MYGOFLIGHT device holder. Press both green buttons to remove.
                MOUNT ANY DEVICE
                From iPad to GoPro this mount can securely hold any device including iPad, iPhone, Android devices, Microsoft Surface, GoPro, Garmin GPS, and even more.

                Flex Yoke Demonstration


                The Sport Mount - Flex Yoke construction:
                • The arm is comprised of three independent joints, all adjustable and lockable from a single, centrally located, control knob.
                • The control knob joint is adjustable to 360° and the two end joints are mini-ball heads that are adjustable to 105°. The yoke clamp has a quick release toggle clasp.
                • Fits yoke shafts from 5/8" to a maximum of 1 1/2" The control knob allows partial loosening for safe and precise iPad/Tablet positioning.
                • The control knob allows partial loosening for safe and precise device positioning.
                • No longer limited to fixed length, limited rotation RAM arms.
                • Takes all of the guess work out of mount size selection and problems of imprecise positioning.

                To position:
                • Position and lock the yoke clamp. Tighten the control knob on the flex arms.
                • Attach the Device Holder (Sold Separately) with device to the Sport Adapter
                • Loosen the control knob, position the device.
                • Tighten the yoke clamp.
                • Fine tune device positioning, tighten control knob.

                Other details:
                • Arm Extension: 8.89cm (3.5") to 26.67cm (10.5")
                • Arm Diameter: 1.91cm 3/4"
                • Arm Material: Aluminum
                • Yoke Clamp Expansion: Min. 1.91cm (3/4") or Max. 3.81cm (1 1/2")
                • Yoke Clamp Material: Plastic and Aluminum
                • Sport Adapter Diameter: 3.81cm (1 1/2")
                • Sport Adapter Material: Aluminum
                • Weight: 386 grams (13.6 Oz.)

                Included components:
                • Flex Yoke Base
                • Generation 3 Sport Adapter

                More on MyGoFlight

                155,00€  Inc Tax
                MGF Universal Cradle (MNT-1610)

                Sport - Universal Cradle

                Product Description
                THE ONLY FUTURE PROOF MOUNTING SYSTEM


                The Sport - Universal Cradle is designed to work with almost any tablet in virtually any case, or no case at all. As a mountable, it connects and easily rotates when paired with MGF Sport Mounts. The arms of the cradle are adjustable via quick release knobs making it easy to insert and remove your tablet. Weighing only 4 ounces the Universal Cradle is incredibly light-weight. No matter how you use it, the Sport Cradle meets the demands of pilots operating in extreme motion.

                Compatible with any tablet from 17.78cm (7 inches) to 27.94cm (11 inches):

                * The Universal Cradle is compatible with the NEW iPad Pro 10.5".

                Compatible with any protective case:

                Since the Universal Cradle adjusts to any size it is the only iPad/Tablet mounting solution that is Future Proof. This will be the last mounting solution you will ever have to purchase. It will adjust to fit any sized iPad or Tablet that you might purchase in the future.


                Compact Suction Features:
                COCKPIT READY
                Tablet secured, viewable, and operable with one hand during critical phases of flight as required by FAA.

                360° ROTATION
                Rotate tablet between landscape and portrait positions in-flight when mounted.


                QUICK MOUNT RING
                Allows for fast coupling and tablet rotation when used with Sport Mounts.

                SPORT MOUNT COMPATIBLE
                Cradle easily connects and rotates when paired with Sport Mounts.


                Other details:
                • Extended: 29.85cm (11 3/4")
                • Unextended: 16.51cm (6 1/2")
                • Weight: 124g  (4 Oz.)
                • Material: Aluminum, Rubberized Contact Points

                More on MyGoFlight
                156,00€  Inc Tax
                MGF Universal Cradle XL (MNT-1615)

                Sport - Universal Cradle XL

                Product Description
                THE ONLY FUTURE PROOF MOUNTING SYSTEM


                The Sport - Universal Cradle is designed to work with almost any tablet in virtually any case, or no case at all. As a mountable, it connects and easily rotates when paired with MGF Sport Mounts. The arms of the cradle are adjustable via quick release knobs making it easy to insert and remove your tablet. Weighing only 4 ounces the Universal Cradle is incredibly light-weight. No matter how you use it, the Sport Cradle meets the demands of pilots operating in extreme motion.

                Compatible with any tablet from 25.4cm (10 inches) to 33cm (13 inches):

                * The Universal Cradle is compatible with the NEW iPad Pro 10.5".

                Compatible with any protective case:


                Since the Universal Cradle adjusts to any size it is the only iPad/Tablet mounting solution that is Future Proof. This will be the last mounting solution you will ever have to purchase. It will adjust to fit any sized iPad or Tablet that you might purchase in the future.


                Compact Suction Features:
                COCKPIT READY
                Tablet secured, viewable, and operable with one hand during critical phases of flight as required by FAA.

                360° ROTATION
                Rotate tablet between landscape and portrait positions in-flight when mounted.


                QUICK MOUNT RING
                Allows for fast coupling and tablet rotation when used with Sport Mounts.

                SPORT MOUNT COMPATIBLE
                Cradle easily connects and rotates when paired with Sport Mounts.


                Other details:
                • Extended: 40cm (15 3/4")
                • Unextended: 26.67cm (10 1/2")
                • Weight: 142g (5 Oz.)
                • Material: Aluminum, Rubberized Contact Points

                More on MyGoFlight
                169,00€  Inc Tax
                MGF Universal Cradle Long Extensions (MNT-1611)

                Sport - Universal Cradle XL

                Product Description
                THE ONLY FUTURE PROOF MOUNTING SYSTEM


                The Sport - Universal Cradle is designed to work with almost any tablet in virtually any case, or no case at all. As a mountable, it connects and easily rotates when paired with MGF Sport Mounts. The arms of the cradle are adjustable via quick release knobs making it easy to insert and remove your tablet. Weighing only 4 ounces the Universal Cradle is incredibly light-weight. No matter how you use it, the Sport Cradle meets the demands of pilots operating in extreme motion.

                Compatible with any tablet from 10 inches to 13 inches:

                * The Universal Cradle is compatible with the NEW iPad Pro 10.5".

                Compatible with any protective case:


                Since the Universal Cradle adjusts to any size it is the only iPad/Tablet mounting solution that is Future Proof. This will be the last mounting solution you will ever have to purchase. It will adjust to fit any sized iPad or Tablet that you might purchase in the future.


                Compact Suction Features:
                COCKPIT READY
                Tablet secured, viewable, and operable with one hand during critical phases of flight as required by FAA.

                360° ROTATION
                Rotate tablet between landscape and portrait positions in-flight when mounted.


                QUICK MOUNT RING
                Allows for fast coupling and tablet rotation when used with Sport Mounts.

                SPORT MOUNT COMPATIBLE
                Cradle easily connects and rotates when paired with Sport Mounts.



                More on MyGoFlight
                39,00€  Inc Tax
                MGF Universal Cradle Short Extensions (MNT-1612)

                Sport - Universal Cradle

                Product Description
                THE ONLY FUTURE PROOF MOUNTING SYSTEM


                The Sport - Universal Cradle is designed to work with almost any tablet in virtually any case, or no case at all. As a mountable, it connects and easily rotates when paired with MGF Sport Mounts. The arms of the cradle are adjustable via quick release knobs making it easy to insert and remove your tablet. Weighing only 114g (4 ounces) the Universal Cradle is incredibly light-weight. No matter how you use it, the Sport Cradle meets the demands of pilots operating in extreme motion.

                Compatible with any tablet from 17.78cm (7 inches) to 27.94cm (11 inches):

                * The Universal Cradle is compatible with the NEW iPad Pro 10.5".

                Compatible with any protective case:
                Since the Universal Cradle adjusts to any size it is the only iPad/Tablet mounting solution that is Future Proof. This will be the last mounting solution you will ever have to purchase. It will adjust to fit any sized iPad or Tablet that you might purchase in the future.


                Compact Suction Features:
                COCKPIT READY
                Tablet secured, viewable, and operable with one hand during critical phases of flight as required by FAA.

                360° ROTATION
                Rotate tablet between landscape and portrait positions in-flight when mounted.


                QUICK MOUNT RING
                Allows for fast coupling and tablet rotation when used with Sport Mounts.

                SPORT MOUNT COMPATIBLE
                Cradle easily connects and rotates when paired with Sport Mounts.



                More on MyGoFlight
                27,00€  Inc Tax
                MGF GoPro®/Garmin Virb Adapter (MNT-1655)

                Sport - GoPro ®/Garmin Virb Adapter

                Combine the Sport - GoPro® Adapter with any MGF Sport Mount (Sold Seperately) to mount your GoPro® camera in your plane, boat, or anywehre else you desire.

                The Sport - GoPro® Adapter is made out of aircraft grade aluminum and works with any GoPro® camera. Capture all of your life moments on your GoPro® using the Sport - GoPro® Adapter.

                ** NOTE: This is just the cradle. Mounts and GoPro® camera both sold seperately.

                ** DISCLAIMER: This adapter is not intended for external use. Only use this adapter to mount your camera inside the cockpit. MGF is not responsible for lost or damaged GoPro or Garmin VIRB cameras that were mounted outside.

                Mounting your GoPro® with the Sport - GoPro® Adapter and MGF Flex Arms allows you the ability to position your GoPro® camera anywhere you would like. MGF Flex Arms are infinitely adjustable so you can mount your GoPro® camera anywhere and everywhere. Something that you are not able to accomplish with any other mounting system.

                Sport - GoPro ®/Garmin Virb Adapter Demonstration

                Sport - GoPro® Adapter works with all GoPro® models and all Garmin Virb models


                  Other Details:
                  • Hardware: Locking Screw, Plastic Washers
                  • Weight: 57g (2 Oz.)
                  • Material: Aluminum
                  • Adapter Diameter: 3.81cm (1.5")

                  More on MyGoFlight

                  51,00€  Inc Tax
                  MGF Phone Cradle (MNT-1650)

                  Sport - Phone Cradle
                  The Sport - Phone Cradle is designed to work with almost any smartphone in virtually any case, or no case at all. As a mountable, it connects and easily rotates when paried with MGF Sport Mounts. The arms of the cradle are adjustable via the adjustable knob making it easy to insert and remove your phone securely. No matter how you use it, the Sport - Phone Cradle meets the demands of pilots operating in extreme motion.

                  Compatible with any smartphone as small as the iPhone 5 and as big as the iPhone 7 Plus (Minimum width = 5.72cm (2 1/4") | Maximum width = 10.16cm (4"))


                  Compatible with any protective case

                  Phone Cradle Features:
                  COCKPIT READY
                  Tablet secured, viewable, and operable with one hand during critical phases of flight as required by FAA.

                  360° ROTATION
                  Rotate tablet between landscape and portrait positions in-flight when mounted.


                  QUICK MOUNT RING
                  Allows for fast coupling and tablet rotation when used with Sport Mounts.

                  SPORT MOUNT COMPATIBLE
                  Cradle easily connects and rotates when paired with Sport Mounts.


                  Other Details:
                  • Extension: Min: 5.72cm (2.25"), Max: 10.16cm (4")
                  • Weight: 54g (1.9 Oz.)
                  • Material: Aluminum
                  • Adapter Diameter: 3.81cm (1.5")

                  More on MyGoFlight

                  54,00€  Inc Tax
                  MGF GPS Adapter (MNT-1660)

                  Sport - GPS Adapter
                  Sport - GPS Adapter is the perfect solution for mounting all Garmin Portable Avionics, as well as any other device that uses the AMPs hole pattern.

                  The Sport - AMPs Adapter securely connects to all Garmin portables including the aera® 660, aera® 796, aera® 795, aera® 510 GPSMAP® 696, GPSMAP® 695, and more. Once the GPS Adapter is connected to the GPS you can quickly and securely mount the portable avionics using any MGF Sport Mount (Sold Separately).

                  How To Attach Garmin Portable GPS:

                  1. Screw GPS Adapter plate to the Garmin portable power cradle using the 4 included screws and lock nuts.2. Screw Sport Adapter onto GPS Adapter plate using the included screw.

                  3. Connect Garmin portable power cradle to the Garmin device.


                  4. Attach Garmin device to MYGOFLIGHT Sport Mount (Sold Separately).


                  Other Details:

                  • AMPs Dimensions: 4.45cm x 5.08cm (1 3/4" x 2")
                  • Weight: 71g (2.5 Oz.)
                  • Material: Aluminum

                  More on MyGoFlight

                  51,00€  Inc Tax
                  Compact Suction - Universal iPad/Tablet Mount Kit (UMK-1812)
                  Compact Suction - Universal iPad/Tablet Mount Kit
                  The Compact Suction - Universal iPad Mount Kit is for pilots who want to mount their iPad or other device off a glass windshield or other smooth surface while using the least amount of space. This is especially useful when using the mount on a side window close to the pilot. Each of these mounts comes with a Generation 3 Sport™ Adapter. The adapter can tilt up to 90 degrees.

                  The Compact Suction - Universal iPad Mount Kit is the most versatile mounting solution for pilots that would like to install an device on almost any flat, smooth surface. The high strength suction cup twist and locks to provide a secure hold to the windshield or metal panel. For pilots looking for more articulation and distance from the iPad to the mounting surface, please check out the Sport Mount - Flex Suction.

                  The mount is portable and can easily fit in your flight bag or can be positioned and left on-board. Perfect for owners and renters alike.

                  The greatest advantage that this Universal iPad Mount Kit offers is the ability to mount any size iPad or Tablet from as small as the iPad Mini to as big as the iPad Pro. Attach the larger clips (included) onto the Universal Cradle to mount your iPad or Tablet while keeping it in a protective case.

                  Since the Universal Cradle adjusts to any size it is the only iPad/Tablet mounting solution that is Future Proof. This will be the last mounting solution you will ever have to purchase. It will adjust to fit any sized iPad or Tablet that you might purchase in the future.

                  Compact Suction Features:
                  PILOT INSTALLABLE
                  Sport Mount - Compact Suction can be installed by any pilot in any aircraft.


                  NO TOOLS REQUIRED
                  Compact Suction can be installed onto any window or smooth surface with no tools.


                  360° ROTATION
                  Rotate iPad/Device between landscape and portrait positions in-flight when mounted.






                  Compact Suction Construction:
                  2. Made of true rubber, the suction cup is designed for years of use.4. Made out of a lightweight, high strength, composite material.
                  1. This is a lift to lock suction cup mount with a multi-positional arm.3. Holds strong to any glass, plastic or similar smooth surface and provides a rigid and firm platform for positioning and holding the device.



                  To position:
                  1. Press suction cup against smooth surface, press center button and lift lever to lock.2. Loosen the suction cup knob, position mount location, then tighten.3. Loosen sport adapter knob, position adapter to desired location of device, then tighten.4. Attach the Universal Cradle (Included) to the Sport Adapter.



                  Included components:
                  Compact Suction Cup Base

                  Generation 3 Sport Adapter

                  Sport - Universal Cradle
                  (Please Select Cradle Version)


                  Specifications:

                  • Suction Cup Material - Rubber, plastic
                  • Sport Adapter Material - Aluminum
                  • Sport - Universal Cradle Material - Anodized Aluminum


                  More on MyGoFlight

                  311,00€  Inc Tax
                  Carbon Monoxide Detector (ASA-CO-D)
                  Carbon Monoxide Detector
                  This Carbon Monoxide Detector can save a pilot’s life, especially when flying with the heater on, by warning of the presence of CO in the cockpit—the spot will turn gray/black when CO is in the air. The spot on the detector returns to normal color after it is exposed to fresh air.

                  You can use this CO-DETECTOR as your personal and portable CO detection device. With the adhesive back, stick it on the panel or dash for a semi-permanent installation, or wear it on an ID badge or on a lanyard.

                  Usable with Airplanes, Cars, Fuel trucks, Grass cutting equipment tugs,Campers and more...

                  Useful life is 90 daysonce opened.
                  6,00€  Inc Tax
                  Flex Suction - Universal iPad/Tablet Mount Kit (UMK-1805)

                  Universal Flex Suction Kit -Adjustable arms allow you to mount any sized iPad or Tablet

                  The Sport Mount - Flex Suction - an INFINITELY articulating and adjustable arm. There is no other suction cup mount for a device that does all that this unit does in a single, light-weight, easy to configure mount.

                  This one mount can operate as a compact suction cup, allowing a close position to the glass of 8.26cm (3.25"). It can operate as standard suction cup mount extending to 26.67cm (10.5").

                  The Sport Mount - Flex Suction is for pilots who want to mount their device off a glass windshield, side window or other smooth surface.

                  Flex Suction Demonstration

                  Features:
                  PILOT INSTALLABLE
                  Sport Mount - Compact Suction can be installed by any pilot in any aircraft.


                  NO TOOLS REQUIRED
                  Compact Suction can be installed onto any window or smooth surface with no tools.


                  360° ROTATION
                  Rotate iPad/Device between landscape and portrait positions in-flight when mounted.

                  Ball and Socket ends a ratcheting center provide infinite adjustment to height and position.



                  The Sport Mount - Flex Suction construction:
                  • The arm is comprised of three independent joints, all adjustable and lockable from a single, centrally located, control knob
                  • The control knob joint is adjustable to 360° and the two end joints are mini-ball heads that are adjustable to 105°.
                  • The suction cup attachment joint is a lockable socket which rotates 220°
                  • The control knob allows partial loosening for safe and precise device positioning
                  • No longer limited to fixed length, limited rotation RAM arms
                  • Takes all of the guess work out of mount size selection and problems of imprecise positioning.

                  The mount is portable and can easily fit in your flight bag or can be positioned and left on-board. Perfect for owners and renters alike.

                  More information about Flex Suction Cup.

                  To position:
                  1. Position and lock the suction cup to the glass or smooth surface, tighten the control knob. Be sure the glass or surface is clean, the base of the suction cup is clean, and the suction cup attachment socket runs vertically to assure hold and minimize vibration. Tighten the suction cup socket and control knob.2. Attach the Universal Cradle (Included) to the Sport Adapter.
                  3. Loosen the control knob, position the iPad/Device.4. Fine tune iPad/Tablet positioning, tighten control knob.


                  Included components:

                  1. Sport Mount - Flex Suction


                  2. Flex Arm (Max. Extension - 26.67cm (10.5") | Min. Extension - 8.26cm (3.25")3. Generation 3 Sport Adapter


                  4. Sport - Universal Cradle (Please Select Cradle Version)



                  More on MyGoFlight

                  311,00€  Inc Tax
                  Per Page      1 - 20 of 42