Pilot Supplies
FTA-550E Airband VHF Handheld Transceiver with ILS and VOR Navig (with Lithium Ion Battery)
The FTA-550 Pro-X Airband transceiver incorporate an advanced user interface featuring a dot matrix display ensuing intuitive operation and optimized performance. The FTA-550E is fully compliant with current CAA regulations regarding the use of 8.33kHz channels spacing for transmit and receive.
Key Features:
- 5 watt TX output power ( Air band AM 5W PEP typical 1.5W carrier)
- Large 1.7" x 1.7" ( 43.2mm x 43,2mm) Dot matrix display ( 160 x 160 dots)
- ILS navigation display
- VOR Navigation capability
- 200 memory channel with 15 alphanumeric characters per memory
- Back-Lit keypad and display with dimmer control
- Water protection - IPX5 rating
- Loud Audio (800mw)
- includes high capacity Rechargeable Li-ion Battery pack ( 7.4v 1800mAh).
- includes Alkaline Battery Tray ( 6 x AA).
Specifications:
GENERAL | |
Frequency Range | TX: 118.000 MHz to 136.975 MHz |
RX: 108.000 MHz to 136.975Mhz (NAV and COM Band) | |
Channel Spacing | 25kHz and 8.33kHz |
Emission Type | TX: AM |
RX: AM | |
Supply Voltage | 6.0 to 9.5v DC |
Current Consumption (approx) | 300μA Power OFF |
70mA Battery Saver ON. Sver Ratio 50% | |
80mA Squelch ON | |
300mA Receiver | |
0.9A Transmit ( 1.5W carrier) | |
Temperature Range | -10°C to +60°C (14°F to 140°F ) |
Antennae Connector | BNC |
Case Size (WxHxD0 | 2.4" x 5.2" x 1.3" (62 x 133 x 34mm) with SBR-12U |
Weight | 410gm (14.5oz) with SBR-12U and Antenna |
RECEIVER | |
Circuit Type | Double Conversion Superhet |
IF | 47.25MHz and 450KHz |
Sensitivity | Better than 0.8μV (for 6dB S/N with 1KHz 30% Modulation) |
Selectivity | Better than 8kHz/-6dB |
Adjacent Channel Selectivity | Less than 25kHz/-60dB |
AF Output (internal Speaker) | 0.8W @ 16ohms 10% THD |
TRANSMITTER | |
Power Output | 5.0W (PEP) @ 1.5W carrier Power) |
Frequency Stability | Better than ±1ppm(-10°C to +60°C) |
Modulation System | Low level Amplitude Modulation |
Spurious Emissions | > 70dB below Carrier |
Internal Microphone Type | Condenser |
External Microphone Type | 150Ω |
Package:
- FTA-550 Radio body
- Li-ion battery pack
- Charger Cradle with AC Power supply
- Cigarette Lighter DC/DC charging cable
- Antennae
- Belt Clip
- Headset Adaptor Cable
- Alkaline Battery Tray
- USB cable for programming memories
- User Manual
FTA-750E Airband VHF Handheld Transceiver with Integral GPS, ILS (Localizer and Glide Slope) and VOR Navigation (with Lithium Ion Battery)
The FTA-750 Spirit Airband transceiver incorporate an advanced user interface featuring a dot matrix display ensuing intuitive operation and optimized performance. The FTA-750E is fully compliant with current CAA regulations regarding the use of 8.33kHz channels spacing for transmit and receive.
Key Features:
- 5 watt TX output power ( Air band AM 5W PEP typical 1.5W carrier)
- Large 1.7" x 1.7" ( 43.2mm x 43,2mm) Dot matrix display ( 160 x 160 dots)
- ILS navigation display
- VOR Navigation display
- Integrated 66 channel WAAS GPS receiver
- Waypoint navigation and GPS waypoint logging ¹
- 200 memory channel with 15 aplhanumberic characters per memory
- Back-Lit keypad and display with dimmer control
- Water protection - IPX5 rating
- Loud Audio (800mw)
- includes high capacity Rechargeable Li-ion Battery pack ( 7.4v 1800mAh).
- inlcudes Alkaline Battery Tray ( 6 x AA).
¹ YCE01PC Programming software (available online) is required to view GPS logging data.
Specifications:
GENERAL | |
Frequency Range | TX: 118.000 MHz to 136.975 MHz |
RX: 108.000 MHz to 136.975Mhz (NAV and COM Band) | |
Channel Spacing | 25kHz and 8.33kHz |
Emission Type | TX: AM |
RX: AM | |
Supply Voltage | 6.0 to 9.5v DC |
Current Consumption (approx) | 300μA Power OFF |
70mA Battery Saver ON. Sver Ratio 50% | |
80mA Squelch ON | |
300mA Receiver | |
0.9A Transmit ( 1.5W carrier) | |
Temperature Range | -10°C to +60°C (14°F to 140°F ) |
Antennae Connector | BNC |
Case Size (WxHxD) | 2.4" x 5.2" x 1.3" (62 x 133 x 34mm) with SBR-12U |
Weight | 410gm (14.5oz) with SBR-12U and Antenna |
RECEIVER | |
Circuit Type | Double Conversion Superhet |
IF | 47.25MHz and 450KHz |
Sensitivity | Better than 0.8μV (for 6dB S/N with 1KHz 30% Modulation) |
Selectivity | Better than 8kHz/-6dB |
Adjacent Channel Selectivity | Less than 25kHz/-60dB |
AF Output (internal Speaker) | 0.8W @ 16ohms 10% THD |
TRANSMITTER | |
Power Output | 5.0W (PEP) @ 1.5W carrier Power) |
Frequency Stability | Better than ±1ppm(-10°C to +60°C) |
Modulation System | Low level Amplitude Modulation |
Spurious Emissions | > 70dB below Carrier |
Internal Microphone Type | Condenser |
External Microphone Type | 150Ω |
GPS UNIT | |
Receiver Channels | 66 |
Sensitivity | better than -147dBm |
Time to First Fix | 1 Minute typical (@ Cold Start) |
5 Seconds typical ( @ Hot Start) | |
Geodetic Datum | WGS84 |
Specifications are subject to change without notice or obligation |
Package:
- FTA-750 Radio body
- SBR-12Li Li-ion battery pack
- SBH-11 Charger Cradle with SAD-11C AC Power supply
- SDD-12 Cigarette Lighter DC/DC charging cable
- SRA-13A Antenna
- SHB-11 Belt Clip
- SCU-15 Headset Adaptor Cable
- SBT-12 Alkaline Battery Tray
- T9101606 USB cable for programming memories
- User Manual
FTA-850E Color Screen Aviation Radio with GPS and Bluetooth
Introducing the Yaesu FTA-850L portable airband transceiver, precisely engineered to meet the requirements of top aviators. Boasting top tier features like a 2.4" full-color TFT display, enhanced navigtion features using ILS, VOR, or GPS, and a 400 channel memory bank. Forget the wires, featuring a Built-in bluetooth module allowing operation with a commercially available bluetooth headset, or use with Yaesu's optional SSM-BT10 headset.Built around an ultra-durable polycarbonate housing, the FTA-850L meets the IPX-5 water proof rating, and the stringent MIL-STD-810H standards.
Packaged with:
- a high capacity 2200mAh Lithium-Ion battery,
- Headset adapter,
- 100-240VAC charger,
- 12VDC charger/Power cable,
- drop in charging cradle,
- backup Alkaline battery tray,
- heavy duty belt clip,
- User manual
Key Features:
- Oversized 2.4" TFT Color Display (240 x 320 pixel)
- Dual Frequency Display
- Wireless Bluetooth operation
- ILS Navigation Display (localizer and Glide Slope)
- VOR Navigation Display
- Integrated 66 Channel WAAS GPS Receiver
- Waypoint Navigation
- 8.33 kHz Narrow Band Compatible
- 400 Memory Channels with 14 Character Alphanumeric Tags
- Water Protection - IPX5 Rating
- Rugged Construction: Certified to MIL-STD-810H
- Loud Audio Output
- PC Programmable (USB Cable Included)
ILS Navigation (Localizer and Glide Slope)
When the FTA-850L receives an ILS signal, the display will automatically switch to the NAV band screen which shows a CDI (Course Deviation Indicator) based on the received localizer signal or the glide slope signal. Course and height deviation are clearly presented on the color CDI display, and aid with the landing approach under bad weather conditions.
VOR Navigation
When the FTA-850L receives a VOR signal, the display automatically switches to the NAV band screen and shows the CDI. The top of the compass rose always indicates the direction set as the OBS. The SOG (Speed Over Ground) is displayed only when the FTA-850L internal GPS unit is activated and a fix is acquired.
Flight-Route Display and Navigation
The Flight Route Navigation feature clearly presents the traveling route, listing the waypoints from the departure point to the final destination, including the current position where Navigation is being performed. Route, Location and travel status can be assessed at a glance. Navigation is also displayed on an easy-to-read color compass screen.
Dual Frequency Display
DD (Dual Frequency Display) screen presents two frequencies separately on the top and bottom of the screen. The most recently tuned information (Comm Frequency, Memory group and Weather channel) are always set into the active channel automatically. the target mode and channel can easily be switched between different modes using the DD screen, without going through the MENU.
Owner's Manual:
Operating Manual for the FTA850
Programming Software:
FTA-850L YCE46 PC Programming Software (V1.0.0.0)
Exclusive Airbus cap. 100% cotton with Airbus logo and "we make it fly" embroidered
New Icom FA-B02AR Air Band Antenna for:
MA-82 Magnetic Antenna Base (BNC)
The Lafayette MA-82 magnetic base for BNC antenna is suitable for indoor or outdoor use. Soft water-proof fabric lined under the magnetic base prevent surfaces of being scratched. With female BNC connector on the base and male BNC connector on the cable.
Dimensions: d=82 mm
Weight: 460 g
Cable: Coaxial RG-58A/U
Cable Length: 5 m
Cable Connector: m BNC
Base Connector: f BNC
*antenna is not included!
- Bracket Window Coxial cable: RG-174U,
- Connector BNC,
- Cable length: 3 meters.
- Bracket Window Coxial cable: RG-174U,
- Connector SMA
- Cable length: 3 meters.
iPad version:
- iPad 9.7", iPad Pro 9.7"
- iPad Air 1/2
The iPad Kneeboard/Mountable Case is the perfect aviation kneeboard, mount and everyday case for the iPad. It is designed for the pilot looking to secure their iPad to their leg or for the pilot that prefers to mount their iPad. The black, smooth polycarbonate adds protection and great feel to the iPad. Take your iPad from air to office to home. It is perfect for pilots of all aircraft. This product fits the iPad 9.7", iPad Pro 9.7" and iPad Air 1/2.
NOTE: This is the iPad Kneeboard only. Mounts sold separately.
COCKPIT READY iPad secured, viewable, and operable with one hand during critical phases of flight. | iPAD KNEEBOARD Secure your iPad on either leg for use with either hand. | ||
QUICK MOUNT RING Allows for fast coupling and iPad rotation when used with MGF Sport Mount. | SPORT MOUNT COMPATIBLE Case easily connects and rotates when paired with MGF Sport Mounts. | ||
360° ROTATION Rotate iPad between landscape and portrait positions in flight when mounted. | MULTI-USE Take your iPad from air to office to home, eliminating the inconvenience and cost of using more than one case. | ||
SMART COVER COMPATIBLE Use with an Apple Smart Cover for the complete iPad Kneeboard case. |
Other Details:
- Dimensions (L x W X D): 24.77cm x 19.69cm x 1.6cm (9.75" x 7.75" x .63")
- Kneeboard/Lapboard: Yes/No
- Mountable: Yes
- Material: Polycarbonate
- Colors & Finish: Black with soft rubber coatin
- Port Access: All ports accessible
- Clipboard: No
- Aluminum Rails On Back: Yes with rubber feet
- Leg Strap: Yes
- Case Skin Option: No
- Apple Smart Cover Compatible: Yes
More on MyGoFlight
Icom MB-96F Fixed Type Belt Hanger
Icom MB-96F Fixed Type Belt Hanger (For use with MB-103) for different types of Transceivers.
Icom MB-96N Swivel Hanger
Icom MB-96N Swivel (Leather) Type Belt Hanger for different types of Transceivers.
iPad version:
- iPad mini 4/
The iPad Kneeboard/Mountable Case is the perfect aviation kneeboard, mount and everyday case for the iPad. It is designed for the pilot looking to secure their iPad to their leg or for the pilot that prefers to mount their iPad. The black, smooth polycarbonate adds protection and great feel to the iPad. Take your iPad from air to office to home. It is perfect for pilots of all aircraft. This product fits the iPad mini 4/5.
NOTE: This is the iPad Kneeboard only. Mounts sold separately.
COCKPIT READY iPad secured, viewable, and operable with one hand during critical phases of flight. | iPAD KNEEBOARD Secure your iPad on either leg for use with either hand. | ||
QUICK MOUNT RING Allows for fast coupling and iPad rotation when used with MGF Sport Mount. | SPORT MOUNT COMPATIBLE Case easily connects and rotates when paired with MGF Sport Mounts. | ||
360° ROTATION Rotate iPad between landscape and portrait positions in flight when mounted. | MULTI-USE Take your iPad from air to office to home, eliminating the inconvenience and cost of using more than one case. | ||
SMART COVER COMPATIBLE Use with an Apple Smart Cover for the complete iPad Kneeboard case. |
Other Details:
- Dimensions (L x W X D): 20.32 x 13.48 x 0.61 cm (8.0 x 5.31 x 0.24 in)
- Kneeboard/Lapboard: Yes/No
- Mountable: Yes
- Material: Polycarbonate
- Colors & Finish: Black with soft rubber coatin
- Port Access: All ports accessible
- Clipboard: No
- Aluminum Rails On Back: Yes with rubber feet
- Leg Strap: Yes
- Case Skin Option: No
- Apple Smart Cover Compatible: Yes
More on MyGoFlight
iPad version:
- iPad Pro 10.5"
- iPad Air 10.5"
The iPad Kneeboard/Mountable Case is the perfect aviation kneeboard, mount and everyday case for the iPad. It is designed for the pilot looking to secure their iPad to their leg or for the pilot that prefers to mount their iPad. The black, smooth polycarbonate adds protection and great feel to the iPad. Take your iPad from air to office to home. It is perfect for pilots of all aircraft. This product fits the iPad 10.5" / iPad Air 10.5".
NOTE: This is the iPad Kneeboard only. Mounts sold separately.
COCKPIT READY iPad secured, viewable, and operable with one hand during critical phases of flight. | iPAD KNEEBOARD Secure your iPad on either leg for use with either hand. | ||
QUICK MOUNT RING Allows for fast coupling and iPad rotation when used with MGF Sport Mount. | SPORT MOUNT COMPATIBLE Case easily connects and rotates when paired with MGF Sport Mounts. | ||
360° ROTATION Rotate iPad between landscape and portrait positions in flight when mounted. | MULTI-USE Take your iPad from air to office to home, eliminating the inconvenience and cost of using more than one case. | ||
SMART COVER COMPATIBLE Use with an Apple Smart Cover for the complete iPad Kneeboard case. |
Other Details:
- Kneeboard/Lapboard: Yes/No
- Mountable: Yes
- Material: Polycarbonate
- Colors & Finish: Black with soft rubber coatin
- Port Access: All ports accessible
- Clipboard: No
- Aluminum Rails On Back: Yes with rubber feet
- Leg Strap: Yes
- Case Skin Option: No
- Apple Smart Cover Compatible: Yes
More on MyGoFlight
The Yaesu SCU-15 Headset Adaptor Cable is compatible with: FTA-250L, FTA-450L, FTA-550 AA, FTA-550L and FTA-750L models.
iPad version:
- iPad Pro 11" (Gen 1)
The iPad Kneeboard Sport Pro 11 by MyGoFlight is made of black, smooth polycarbonate, and it adds protection and a great feel to the iPad Pro 11 1st-Generation. The iPad Kneeboard Sport™ was designed for pilots by pilots. It is designed to work in aircraft where space is tight or where there is a cyclic, or control stick being used between the legs. It is perfect for pilots of helicopters, sport aircraft, and when there is tight yoke clearance or when mounting is desired. It comes with a Velcro strap.
The iPad Kneeboard Sport™ Pro 11- is also designed to mate using a quick-connect iPad Sport™ Adapter or Sport™ Mount with a yoke, glare shield, or suction cup mounting system offering flexibility in its use in different aircraft.
Other Details:
- Cockpit Ready
- Quick Connect
- 360° Rotation
- Sport Mount Compatible
- The iPad Kneeboard Sport™ Pro 11 is made of black, soft-to-the-touch polycarbonate and is strong and lightweight.
- It is a form-fitted case that holds the iPad securely in place.
- The cut-out design provides access to all of the iPad's ports, buttons, and controls. The Sport™ Pro 11 is NOT compatible with Apple's Smart Cover.
- There are two aluminum rails on the underside of the case that frame your leg and, with the wide elasticized Velcro strap, allows the case to be held securely and comfortably to your leg.
- There are four rubber pads on the rails that allow the case to sit on a desk or table securely as well.
- It is designed to be thin so as to be clear of the yoke, cyclic or control stick. It has a sleek look when used outside of the plane.
- The removable knee strap can be left in the plane leaving you with a beautiful, sleek case for everyday use.
- Ability to always leave the iPad in its case both in and out of the plane, the iPad always remains protected.
- Ability to use a variety of mounts or as a kneeboard from a single case, especially useful for pilots flying various aircraft. Eliminates the need for multiple cradles and cases for the iPad.
- Fits iPad Pro 11 1st-Generation
- Dimensions: Height: 9 7/8", Width: 7 3/16", Depth: 3/4" (25cm x 18cm x 2 cm)
- Mountable: Yes
- Material: Polycarbonate
- Colors & Finish: Black with soft rubber coating
- Port Access: All ports accessible
- Aluminum Rails On Back: Yes with rubber feet
- Leg Strap: Yes
- Apple Smart Cover Compatible: No
More on MyGoFlight
iPad version:
- iPad Pro 11" (Gen 2 & 3)
The iPad Kneeboard Sport Pro 11 by MyGoFlight is made of black, smooth polycarbonate, and it adds protection and a great feel to the iPad 11 2nd- & 3rd- Generation. The iPad Kneeboard Sport™ was designed for pilots by pilots. It is designed to work in aircraft where space is tight or where there is a cyclic, or control stick being used between the legs. It is perfect for pilots of helicopters, sport aircraft, and when there is tight yoke clearance or when mounting is desired. It comes with a Velcro strap.
The iPad Kneeboard Sport™ Pro 11- is also designed to mate using a quick-connect iPad Sport™ Adapter or Sport™ Mount with a yoke, glare shield, or suction cup mounting system offering flexibility in its use in different aircraft.
Other Details:
- Cockpit Ready
- Quick Connect
- 360° Rotation
- Sport Mount Compatible
- The iPad Kneeboard Sport™ Pro 11 is made of black, soft-to-the-touch polycarbonate and is strong and lightweight.
- It is a form-fitted case that holds the iPad securely in place.
- The cut-out design provides access to all of the iPad's ports, buttons, and controls. The Sport™ Pro 11 is NOT compatible with Apple's Smart Cover.
- There are two aluminum rails on the underside of the case that frame your leg and, with the wide elasticized Velcro strap, allows the case to be held securely and comfortably to your leg.
- There are four rubber pads on the rails that allow the case to sit on a desk or table securely as well.
- It is designed to be thin so as to be clear of the yoke, cyclic or control stick. It has a sleek look when used outside of the plane.
- The removable knee strap can be left in the plane leaving you with a beautiful, sleek case for everyday use.
- Ability to always leave the iPad in its case both in and out of the plane, the iPad always remains protected.
- Ability to use a variety of mounts or as a kneeboard from a single case, especially useful for pilots flying various aircraft. Eliminates the need for multiple cradles and cases for the iPad.
- Fits iPad Pro 11 2nd & 3rd Generation
- Dimensions: Height: 9 7/8", Width: 7 3/16", Depth: 3/4" (25cm x 18cm x 2 cm)
- Mountable: Yes
- Material: Polycarbonate
- Colors & Finish: Black with soft rubber coating
- Port Access: All ports accessible
- Aluminum Rails On Back: Yes with rubber feet
- Leg Strap: Yes
- Apple Smart Cover Compatible: No
More on MyGoFlight
Icom OPC-592 adapter Cable to combine with OPC-478 for following transceivers programming:
- IC-A110EURO
- IC-A120EURO
Pilot Controller Kit
Carbon Monoxide (CO) is an extremely hazardous colorless, odorless, and tasteless gas that can lead to potentially fatal pilot incapacitation in small quantities. Deadly Carbon Monoxide (CO) is produced wherever fossil fuels (such as gasoline, kerosene, diesel, natural gas, and propane) are combusted without sufficient oxygen.
Powered aircraft are only sometimes fitted with a CO detector, but more often than not they lack a replacement date. This is extremely dangerous as most commercially available CO detectors lose their protective function after a period of about 90 days!
Due to exactly this reason, we have developed a personal PILOT CONTROLLER KIT® for the safety conscious pilot. This kit can be easily fixed to all our kneeboards featuring a stopwatch fixture.
This simple and precise control can distinguish the PILOT CONTROLLER KIT® from the rest and make it an indispensable companion for flying safely.
The KIT consists of:
- 1 CONTROLLER holder
- 1 Kneeboard socket for stopwatch fixture
- 4 PILOT CONTROLLERS®