Chart Wallet - Book for 8 Charts
Chart wallets organize, hold, carry, and display aeronautical Sectional, WAC, and Low Altitude Enroute charts conveniently. This style features a black vinyl cover, silver wings logo, and clear vinyl organizer pockets. 6 double-sided pockets hold 12 maps between the covers. Expandable binding range depending on how many charts are contained within the wallet.
Dimensions (W x H):
19,7 cm x 29,2 cm
(7-3/4" x 11-1/2")
PolMar PL-760 VHF Air Band Transceiver
PolMar PL-760 VHF Air Band Transceiver is designed for experimental aircraft with limited panel space and requiring low power consumption, the PL-760 fits a standard 5.7 cm (2-1/4") instrument hole.
With it’s built-in voice activated intercom with manual squelch control, the PL-760 has proven superior performance in the noisy environment that kit aircraft are known for. The PL-760 has a 5 Watt transmitter, a 11-33 V power supply, and com frequency range of 118.00 to 136.975 MHz.
|Frequency range:||118.00 to 136.975MHz|
|Acceptable power supply:||11.7V to 33Vdc (Negative ground only)|
|Usable temp. range:||20°C to +60°C|
|Frequency stability:||+/- 5ppm|
|Current drain:||TX: 3A(max), RX 0.8A(max), Standby: 300mA|
|Dimensions:||61 x 159 x 61 mm (W x D x H)|
|Exposed dial face:||56.4mm (2 1/4.5 inches)|
|Output power:||5 W (carrier), 16W (pep)|
|Modulation:||small stage modulation|
|Modulation limiting:||85% to 100%|
|Audio harmonics distortion:||Less than 15% (at 85% modulation)|
|Adjacent channel power:||-70dBc|
|Hum and noise ratio:||More than 40dB|
|Spurious emissions:||-16 dBm or less|
|Receive system:||Double conversion superheterodyne|
|Intermediate frequency:||1st: 38.85MHz (Upper)
2nd: 450kHz (Lower)
|Sensitivity (at 6dB S/N):||Less than 1 uV|
|Squelch sensitivity:||0.5 uV (Threshold)|
|Selectivity:||More than ±8kHz (at 6dB)
Less than ±25kHz (at 60dB)
|Spurious response rejection:||More than 60dB|
|Audio output power:||More than 4W (at 4Ω)|
|Side tone:||More than 100mW (at 600Ω)|
|Hum and noise:||More than 30dB|
|Audio output impedance:||Ext. SP 4Ω (4 to 8Ω) Side tone 600Ω|
|Spurious emissions:||-57dBm or less|
Dimensions (W x D x H):
61 mm x 159 mm x 61 mm
The Flashlight has white, red and blue-green lenses (instrument and map reading). It is waterproof made of lightweight and corrosion resistant materials. This flashlight can be used for preflight inspections as in the cockpit during night flying with red lens installed. It has an extra Krypton bulb stored within.
length=15 cm, diameter=1.7 cm-2.5 cm
2 x AA Cell
Icom IC-F27SR PMR446
ICOM IC-F27SR 8CH Professional PMR446 FM Transceiver
As the successor of the IC-F25SR, the IC-F27SR retains the “simple to use” philosophy with the nonkeypad and non-LCD appearance which can be used with little or no training.
The IC-F27SR provides 800mW (typical) loud and intelligible audio, built-in VOX functions and longer operating time.
- Licence-free communications
- Simple operation for instant communication
- 285 gr. lightweight and compact body (with BP-265 battery pack)
- 35.5 hours of operating time with BP-265 Li-Ion battery pack
- Internal VOX function (Optional headset and adapter cable required)
- IP54 and MIL-STD-810 ruggedness
- Same options as "IC-F3002/F4002" series handhelds are available
- CTCSS and DTCS tone squelch for group call
High Performance, Professional Licence Free Radio.
Outstanding audio quality, high performance and commercial build make the IC-F27SR the ideal licence free radio. This licence free radio is ideal for users in diverse areas such as construction, catering, event management, shopping centres, factories, farms as well as serious outdoor enthusiasts. It has durable and reliable construction to withstand serious usage for a long time.
Up to 35.5 hours of operating time
The IC-F27SR features highly efficient circuitry, providing up to a massive 35.5 hours of operating time* with the supplied BP-265 2000mAh lithium-ion battery pack. This means it can be comfortably last an entire shift.
* Tx: Rx: Stand-by =5: 5: 90 with power save ON. 24.8 hours with BP-264
Outstanding audio quality
800mW audio output is provided from the large 45mm speaker meaning the IC-F27SR can deliver loud and intelligible audio even in extremely noisy environments such as a busy shop floor or construction site.
Just three main controls
Transmit button, volume control and channel selector. This simple to use radio is ideal for high turnover environments and shift work where the radio is constantly passed from person to person.
Lightweight, Compact Body
Easily fits into your shirt pocket. 58 x 186* x 36.5 mm (*Includes antenna) compact dimensions and 285 g.(Includes BP-265). Small size and lightweight (285g) makes this transceiver ideal for all users.
Non-slip, large PTT
The large PTT button is designed to provide non-slip, confident-click, even when wearing gloves.
Commercial grade construction
The IC-F27SR is extremely rugged. It has been tested to 11 categories of environmental military standards for dust protection and water resistance making it ideally suited for outdoor use.
Internal VOX for Hands-free operation
Built-in VOX function provides convenient hands-free operation, when used with our optional headset adapter cable.
500mW output power
The IC-F27SR delivers 500mW (ERP) output power and provides up to 3km* (approx.) coverage. * Depending on the operating environment, weather conditions, etc.
Rotary channel selector
It has a 16-position rotary selector with pre-programmed memory channels (8+8). CTCSS (or DTCS) group code can be programmed by yourself.
Bright 3-color LED
The bright LED shows the operating status: red for transmit, green for listening, or orange for low battery, etc.
Power / volume knob
Upper / lower buttons
Two key functions can be programmed by yourself cloning software. Programmable items are Scan, Priority, Memory, Key lock, Surveillance and Siren functions.
Built-in VOX function provides convenient hands-free operation, when used with optional headset with plug adapter cable OPC-2004.
MIL-STD rugged construction
The radio is tested to IP54 and 11 categories of MIL-STD 810 F environmental tests.
- Surveillance function turns off the LED and beep sound
- Siren function can be used for security alarm
- Power save function
- Low battery alert
- Time-out- timer function
- Monitor function
- TX Channel and talk back functions for quick response while scanning
- Radio-to-radio quick cloning capability
- AC Adapter BC-123SE
- Desktop charger BC-193
- Li-ion Battery pack BP-265
- Belt clip MB-124
*Tx: Rx: Stand-by=5:5:90. Power save function ON.Options:
- Icom Batery Case BP-263
- Icom Headset Interface Cable OPC-2006
- Icom Headset Interface Cable OPC-2004
- Icom Tube Earphone SP-27
- Icom Headset HS-94 - Earhook type with boom microphone
- Icom Headset HS-97 - Throat microphone type
|Frequency coverage:||446.00625 ~ 446.09375 MHz|
|Antenna impedance:||50 Ohm|
|Current drain:||TX: 400 mA|
|RX: 330 mA (AF max.)
70 mA (stand-by)
|Operating temperature range:||-25° to +55°C|
|Dimensions (WxHxD):||58 x 186 x 36.5 mm|
|Output power:||500 mW ERP|
|Adjacent Ch. power:||-60 dB|
|Ext. mic. connector:||3-conductor 2.5(d)mm/2.2 kOhm|
|Receiver system:||double conversion superheterodyne|
|Sensitivity:||26.5 dBµV/m emf (at 20dB SINAD)|
|Squelch Sensitivity:||26.5 dBµV/m|
|Adjacent Ch. selectivity:||81.29 dBµV/m|
|Spurious response:||91.29 dBµV/m|
|Intermodulation rejection ratio:||86.29 dBµV/m|
|Audio output power:
(at 5% distortion)
800mW (typical) with a 12 Ohm load
400mW (typical) with an 8 Ohm load
Headset Interface Cable, ICOM, Dual HT Plug, Straight, Each
ICOM headset interface cables adapt your headset to your radio. These adapter cables allow you to use your HS-Series single pin headsets with your mobile radios. Headsets let you hear more clearly, so get yours connected properly with ICOM headset interface cables.
OPC-2006 is required when using the HS-94, H95 S-and HS-97 with some transceivers.
Icom Headset Interface Cables
Headset Interface Cable, ICOM, Dual HT Plug, Right Angle, Each
Icom headset interface cables adapt your headset to your radio. These adapter cables allow you to use your HS-Series single pin headsets with your mobile radios. Headsets let you hear more clearly, so get yours connected properly with Icom headset interface cables.
OPC-2004 is required when using the HS-94, HS-95 and HS-97 with some transceivers.
- Features Hands-free operation. Requires VS-1/1L/1SL VOX unit for use.
- Reversible earpiece lets you wear the headset over either ear.
- Ear hook wraps behind the ear for a snug fit.
- Flexible gooseneck microphone booms lets you adjust the microphone's position so the other station hear you more clearly.
- O Lapel clip lets you securely clip the headset's cord to your clothing.
Allows you hands-free operation. This headset is designed for combination together with the optional VS-1 PTT/VOX unit.
The HS-94 headset provides portable, convenient communication that lets you keep your hands free while operating in the field, etc. The headset connects easily to VS-1 PTT/VOX unit.
Icom headset HS-97 - Throat microphone type
- Hands-free operation. Requires VS-1/1L/1SL VOX unit for use.
- Compact construction with an inconspicuous mic design (For discreet use without noticeable protrusions)
- High sensitivity microphone for clear audio in noisy environments.
Icom BP-263 Battery Case
Icom BP-263 Battery Case (6x Alkaline AA/LR6 batteries) for use with Transcievers.
*Radio and Batteries are not included!
Icom BP-265 Li-Ion Battery Pack for Transceivers
- Voltage: 7.2 V
- Max. current: 1900 mA (min) - 2000mA (Typ.) - 15Wh
*Radio is not included.