Accessories
Asa Push To Talk Switch
A portable push-to-talk switch (PTT) for use with any general aviation headset, intercom, and radio.
Good communications are essential to a successful flight. This convenient switch mounts to the yoke with a velcro strap, allowing pilots to use their thumb to push the button and communicate with ATC, Unicom, or other aircraft.
This eliminates the distraction of picking up the microphone, for hands-free communication that keeps pilots focused on flying the aircraft. Particularly useful for rental aircraft, which typically might not have push-to-talk switches installed.
- low-profile ergonomic button,
- superior contact switch,
- heavy-duty gold-plated plugs and jack,
- durable, shield coiled cord,
- hook and loop mounting strap,
- plugs into aircraft radio or intercom,
- molded strain relief.
Weight:0.41 kg
MA-82 Magnetic Antenna Base (BNC)
The Lafayette MA-82 magnetic base for BNC antenna is suitable for indoor or outdoor use. Soft water-proof fabric lined under the magnetic base prevent surfaces of being scratched. With female BNC connector on the base and male BNC connector on the cable.
Dimensions: d=82 mm
Weight:460 g
Cable: Coaxial RG-58A/U
Cable Length: 5 m
Cable Connector: mBNC
Base Connector:fBNC
*antenna is not included!
- Bracket Window Coxial cable: RG-174U,
- Connector BNC,
- Cable length: 3 meters.
- Bracket Window Coxial cable: RG-174U,
- Connector SMA
- Cable length: 3 meters.
Icom MB-96F Fixed Type Belt Hanger
Icom MB-96F Fixed Type Belt Hanger (For use with MB-103) for different types of Transceivers.
Icom MB-96N Swivel Hanger
Icom MB-96N Swivel (Leather) Type Belt Hanger for different types of Transceivers.
The Yaesu SCU-15 Headset Adaptor Cable is compatible with: FTA-250L, FTA-450L, FTA-550 AA, FTA-550L and FTA-750L models.
Icom OPC-478UC Programming Cable for USB gate
Compatible with: IC-R20, IC-RX7, IC-A6E, IC-A24E, ...
Icom OPC-592 adapter Cable to combine with OPC-478 for following transceivers programming:
- IC-A110EURO
- IC-A120EURO
The PS30 provides a front mounted, backlit voltage and current meter, which provides the owner an immediate, visibile and accurate indication as to the exact voltage and amperage that the unit is delivering. In terms of power delivery the PS30SWI offers a 13.8 VDC supply at 20 amps continuous, 30 amps surge supply.
The latest from the QJE range, an all new 30amp switch mode DC power supply. QJE are renowned in the CB, amateur radio and electronics market for producing high quality and reliable power supplies.
First and foremost the PS30 provides a front mounted, backlit voltage and current meter, which provides the owner an immediate, visibile and accurate indication as to the exact voltage and amperage that the unit is delivering. In terms of power delivery the PS30SWI offers a 13.8 VDC supply at 20 amps continuous, 30 amps surge supply. Uniquely, unlike lesser non-branded models, the output voltage is internally adjustable from 9.0 to 15.0 VDC. A standard universal 'cigarette' lighter plug is built into the front of the metal chassis for low current (10A) accessories. In addition to the front panel DC socket a pair of large, high current, red and black terminals are provided on the rear panel which are cable of delivering a safe 30a current for more demanding power requirements.
The PS30SWI has a Noise Off-Set control that can be adjusted to eliminate pulse noise from the power supply. It also offers short-circuit protection, over-current protection, plus a user replaceable fuse (8A). For longevity a quiet cooling fan is mounted on the back panel which is thermostatically controlled as required.
PS30SWI Specifications:
- Short Circuit Protection: YES
- Over Current Proection: YES
- Fan Cooled: YES
- Operating Mode: 13.8vDC @ 20a Continuous (30a Surge)
- Output Voltage Regulation: <2% Variance
- Output Voltage Adjustment: 9.0 - 15.0 v DC
- Front DC Socket Capacity: 10a
- Rear Terminal Capacity: 30a
- Metric Dimensions: 70mm (h) x 150mm (w) x220mm (d)
- Metric Weight: 1.5 kg
- 1