MYGOFLIGHT

MYGOFLIGHT

Sort By:  
MYGOFLIGHT Flight Bag PLC Pro (BAG-1026)

MYGOFLIGHT Flight Bag PLC Pro
Designed by pilots to meet the exacting needs of the cockpit environment, The PLC Pro is built from the ground up to be the ultimate solution for storing and protecting all of the gear you will need while flying, with a special focus on your most important tool, the iPad.

It has a specially designed, airport check-point friendly protective pouch to hold an iPad, laptop computer or many other electronic flight bag devices. All of the compartments are easy to see into, making it simple to find what you are looking for.

There is room for everything a pilot needs to take with them in-flight. The Flight Bag PLC™ Pro bag is designed by pilots for pilots to be the ultimate flight bag for all aviators. This bag gives you the style, storage, organization, compact size and functionality like never offered before.

Features:
  • HEADSET STORAGE
    Storage for 2 headsets or overnight gear
  • iPAD STORAGE
    Padded pocket designed to protect the iPad or other tablets
    Pocket dimensions: Height:16" x Width:10" x Depth:3"
  • LAPTOP STORAGE
    Padded pocket designed to protect up to a 16" laptop
    Pocket dimensions: Height:16" x Width:10" x Depth:3"
  • MESH POCKETS
    Interior pockets are made out of mesh to easily locate and access your gear
  • WATER RESISTANT
    Exterior of the bag is made of sail cloth making it water resistant
  • PADDED STRAPS
    Heavily padded backpack and shoulder strap is included
  • CHECKPOINT FRIENDLY
    Laptop pocket lays down flat to make it airport checkpoint friendly
  • 3 YEAR WARRANTY
    This and all other MYGOFLIGHT PLC Series Flight Bags come with a 3 Year Warranty against defects in materials and workmanship.
    If this product is found to be defective, we will repair or replace it.
Storage Layout
  • Front Compartment - Business pocket provides storage for pens, business cards, flashlights, documents, cell phone/iPod/PDA, keys, etc.
  • Quick Access Pocket (Top) - Store items you will need to access quickly such as wallet, sunglasses, keys, etc.
  • Middle Compartment - Accordion style pocket provides easy access to store 2 headsets side-by-side or one on top of the other. Compartment also used for overnight items.
  • Rear Compartment - Strap to secure glasses in case or an optional Air-Tight Fuel Tester container, see through zippered mesh pockets, zippered document pouch, Airport check-point friendly EFB/Laptop/iPad protection pouch (just unzip bag and fold open, computer stays inside).
  • Side Compartments - Large side pocket provides storage for hand held radio. 3 other side pockets provide storage for batteries, water bottle, etc.
  • Back - Hidden I.D. badge keeps your identity protected, back pocket unzips to allow bag to fit onto luggage cart or luggage handle, or keep back pocket zipped to store magazines or other documents.

Other Details:

  • Dimensions: 16" L x 14" W x 8" D
  • Carrying Choices: Ergonomic rubber handle, aircell shoulder strap &/or aircell backpack strap,
  • Compartments: Front, top, 2 side, middle, & back,
  • Weight: 3lbs, 6oz,

More on MyGoFlight.

257,00€  Inc Tax
MYGOFLIGHT Flight Bag PLC Sport 2018 (BAG-1035)

MYGOFLIGHT Flight Bag PLC Sport
Aviators asked. We delivered. A smaller version of the Flight Bag PLC Pro is finally here. The Flight Bag PLC Sport. Enough room to carry one headset, an iPad/EFB, a hand held radio, and other gear. Same industry leading quality, in a compact size.

Designed by pilots to meet the exacting needs of the cockpit environment, The PLC Sport is built from the ground up to be the ultimate solution for storing and protecting all of the gear you will need while flying, with a special focus on your most important tool, the iPad.

It has a specially designed, protective pouch to hold an iPad, laptop computer or many other electronic flight bag devices. All of the compartments are easy to see into, making it simple to find what you are looking for.

Features:
  • HEADSET STORAGE
    Storage for 1 headset or overnight gear.
  • iPAD STORAGE
    Padded pocket designed to protect the iPad or other tablets
    Pocket dimensions: Height:13" x Width:8.75" x Depth:3".
  • LAPTOP STORAGE
    Padded pocket designed to protect up to a 13" laptop
    Pocket dimensions: Height:13" x Width:8.75" x Depth:3".
  • RADIO/BOTTLE STORAGE
    Large side pocket is designed to hold a hand held radio security.
  • MESH POCKETS
    Interior pockets are made out of mesh to easily locate and access your gear.
  • WATER RESISTANT
    Exterior of the bag is made of sail cloth making it water resistant.
  • PADDED STRAPS
    Strong shoulder strap is included.
  • CHECKPOINT FRIENDLY
    Laptop pocket lays down flat to make it airport checkpoint friendly.
  • 3 YEAR WARRANTY
    This and all other MYGOFLIGHT PLC Series Flight Bags come with a 3 Year Warranty against defects in materials and workmanship.
    If this product is found to be defective, we will repair or replace it.
Storage Layout
  • Front Compartment - Business pocket provides storage for pens, business cards, flashlights, documents, cell phone/iPod/PDA, keys, etc.
  • Quick Access Pocket (Top) - Store items you will need to access quickly such as wallet, sunglasses, keys, etc.li>
  • Rear Compartment - Padded iPad/Tablet pocket. Accordion style pocket provides easy access to headset or overnight items. See through zippered mesh pockets.
  • Side Compartments - Large side pocket provides storage for hand held radio or Water Bottle. 3 other side pockets provide storage for batteries, small electronics, etc.
  • Back - Hidden I.D. badge keeps your identity protected, back pocket unzips to allow bag to fit onto luggage cart or luggage handle, or keep back pocket zipped to store magazines or other documents.

Other Details:

  • Dimensions (L x W x D): 35.5 x 33 x 15cm (14" x 13" x 6")
  • Weight: 1.1kg (2lbs, 4oz)

More on MyGoFlight.

202,00€  Inc Tax
MYGOFLIGHT Flight Bag PLC Lite (BAG-1050)

MYGOFLIGHT Flight Bag PLC Lite
Created to be the perfect bag for pilots looking for a light iPad ready flight bag. The PLC Lite is a high quality flight bag built to the same high standards as all other MYGOFLIGHT products. Designed by pilots to meet the exacting needs of the cockpit environment.

The PLC Lite is built from the ground up to be the ultimate solution for storing and protecting the essentials you will need while flying, with a special focus on your most important tool, the iPad. It has a specially designed, protective pouch to hold an iPad, laptop computer or many other electronic flight bag devices.

All of the compartments are easy to see into, making it simple to find what you are looking for. The Flight Bag PLC™ Lite is designed by pilots for pilots to be the ultimate flight bag for all aviators. This bag gives you the style, storage, organization, compact size and functionality like never offered before.

Features:
  • HEADSET STORAGE
    Storage for 1 headset or overnight gear.
  • iPAD STORAGE
    Padded pocket designed to protect the iPad or other tablets
    Pocket dimensions: Height:13" x Width:8.75" x Depth:3".
  • LAPTOP STORAGE
    Padded pocket designed to protect up to a 13" laptop
    Pocket dimensions: Height:13" x Width:8.75" x Depth:3".
  • MESH POCKETS
    Interior pockets are made out of mesh to easily locate and access your gear.
  • WATER RESISTANT
    Exterior of the bag is made of sail cloth making it water resistant.
  • PADDED STRAPS
    Strong shoulder strap is included.
  • 3 YEAR WARRANTY
    This and all other MYGOFLIGHT PLC Series Flight Bags come with a 3 Year Warranty against defects in materials and workmanship.
    If this product is found to be defective, we will repair or replace it.
Storage Layout
  • Front Compartment - Business pocket provides storage for pens, business cards, flashlights, documents, cell phone/iPod/PDA, keys, etc.
  • Rear Compartment - Padded iPad/Tablet pocket. Accordion style pocket provides easy access to headset or overnight items. See through zippered mesh pockets.
  • Back - Hidden I.D. badge keeps your identity protected, back pocket unzips to allow bag to fit onto luggage cart or luggage handle, or keep back pocket zipped to store magazines or other documents.

Other Details:

  • Dimensions: 14" L x 11" W x 6" D (355mm x 279mm x 152mm)
  • Weight: 1lbs, 8oz
  • Material: Sail Cloth

More on MyGoFlight.

128,00€  Inc Tax
MYGOFLIGHT Flight Bag PLC Combo (BAG-PLC-COMBO)

MYGOFLIGHT Flight Bag PLC Combo
Instead of purchasing both of our incredible Flight Bags individually we have made things easy for you and combined them as the Flight Bag PLC Combo. Get both the full size Flight Bag PLC Pro and also the smaller Flight Bag PLC Sport.

Don't forget to add the optional Luggage Cart to make transporting your Flight Bags easier. Purchase the Flight Bag PLC Combo and get $15 off of the optional Luggage Cart.

The Flight Bag PLC™ Pro is for the pilot wanting to move from a traditional flight bag to electronic flight bag. It has a specially designed, airport friendly protective pouch to hold an iPad, Samsung's Galaxy Tab, laptop computer or other EFB devices.

Holds headsets, radios, and other gear. It can also be used for an overnight bag. The Flight Bag PLC™ Sport is perfect for those who want something smaller and who carry a single headset or no headset at all. It has a specially designed, protective pouch to hold an iPad, Samsung's Galaxy Tab, laptop computer or other EFB devices. Holds one headset, hand-held radio, and other gear.

Set includes:

More on MyGoFlight.

498,00€  Inc Tax
MYGOFLIGHT Headset Bag/iPad Sleeve (BAG-2015)

MYGOFLIGHT iPad Protective Sleeve or/and Headset Bag
A soft, string closure Headset Bag to store and protect a headset. This bag also makes an exceptional soft iPad sleeve. Micro-fiber lining cleans and protects the screen while the durable diamond stitch fabric on the outside prevents ripping and tearing.

Fits perfectly into the headset compartment of all PLC Series Flight Bags.

The Headset Bag is made out of durable mesh with a soft, padded lining on the inside, perfect for holding anything you don't want scratched: sunglasses, phones, iPads, tablets, etc. The drawstring closure makes holding all of your small items secure and easy to find.

More on MyGoFlight.

25,00€  Inc Tax
MYGOFLIGHT Luggage Cart (BAG-2030)

MyGoFlight Luggage Cart
The Luggage Cart is the perfect accessory for those that want to add wheels to any flight bag or other luggage that doesn't already have wheels. The Luggage Cart is easily detachable from the flight bag, and folds to a compact shape for quick storage. Two strong elastic cords with plastic hooks can hold multiple bags steady for easy travel.

All PLC Series Flight Bags have a pass through compartment on the back of the bag which allows the Flight Bag to be secured to the cart without the need to use the included straps.

More on MyGoFlight.

59,00€  Inc Tax
MGF Compact Suction (MNT-1812)

Sport Mount - Compact Suction

Product Description

The Sport™ Mount - Compact Suction Cup is for pilots who want to mount their iPad or other device off a glass windshield or other smooth surface while using the least amount of space. This is especially useful when using the mount on a side window close to the pilot. Each of these mounts comes with a Generation 3 Sport™ Adapter. The adapter can tilt up to 90 degrees.

The Sport Mount - Compact Suction Cup is the most versatile mounting solution for pilots that would like to install an device on almost any flat, smooth surface. The high strength suction cup twist and locks to provide a secure hold to the windshield or metal panel. For pilots looking for more articulation and distance from the iPad to the mounting surface, please check out the Sport Mount - Flex Suction.

The mount is portable and can easily fit in your flight bag or can be positioned and left on-board. Perfect for owners and renters alike.

Note: A MGF Device Holder is required to use this mount. If you do not already own one you can add one to your order of this mount.


Compact Suction Features:
PILOT INSTALLABLE
Sport Mount - Compact Suction can be installed by any pilot in any aircraft.


NO TOOLS REQUIRED
Compact Suction can be installed onto any window or smooth surface with no tools.


PREMIUM DESIGN
Vibration minimized, all parts made of metal making it solid and durable.


INFINITELY ADJUSTABLE
Mount swivels 360° and tilts 90° providing infinite adjustment.


360° ROTATION
Rotate iPad/Device between landscape and portrait positions in-flight when mounted.

MGF COMPATIBLE
Quick Mount Adapter is compatible with any MGF Device Holder.



Compact Suction Demonstration


Compact Suction Construction:
2. Made of true rubber, the suction cup is designed for years of use.4. Made out of a lightweight, high strength, composite material.
1. This is a lift to lock suction cup mount with a multi-positional arm.3. Holds strong to any glass, plastic or similar smooth surface and provides a rigid and firm platform for positioning and holding the device.



To position:
2. Loosen the suction cup knob, position mount location, then tighten.4. Attach the Device Holder
(Sold Separately) to the Sport Adapter.
1. Press suction cup against smooth surface, press center button and lift lever to lock.3. Loosen sport adapter knob, position adapter to desired location of device, then tighten.

Specifications:

  • Suction Cup Material - Rubber, plastic.
  • Sport Adapter Material - Aluminum.

Other details:

  • Mount: Compact Suction Cup
  • Arm(s): None
  • Adapter: Sport Adapter - Tilt & Swivel
  • Options: Suction Cup Base

Included components:

    Compact Suction Cup Base


    Generation 3 Sport Adapter





    More on MyGoFlight

    162,00€  Inc Tax
    MGF Flex Suction (MNT-1805)

    Sport Mount - Flex Suction

    Product Description
    MGF has quickly become the go to choice for pilots looking to mount their iPad and other electronics in the cockpit. MGF has used their years of experience, proprietary technology, and the highest quality materials to develop the strongest and most versatile mounting solution on the market.

    The Flex Suction has been designed to meet the needs of pilots and attaches securely to any glass windshield, side window, or other smooth surface.

    Note: A MGF Device Holder is required to use this mount. If you do not already own one you can add one to your order of this mount.

    Features:
    20 g CERTIFIED
    Flex Suction was tested to withstand a 20 g impact. To view the test results Click Here.

    PILOT INSTALLABLE
    Flex Suction can be installed by any pilot in any aircraft. Use the quick release suction cup to securily mount to glass or any other smooth surface.

    INFINITELY ADJUSTABLE
    Ball and socket ends and a ratcheting center provide infinite adjustment to height and position.


    360° ROTATION
    Rotate device between landscape and portrait positions in-flight when mounted.



    QUICK CONNECT
    This mount comes with a Gen 3 Sport Adapter which quickly connects to any MYGOFLIGHT device holder. Press both green buttons to remove.

    MOUNT ANY DEVICE
    From iPad to GoPro this mount can securely hold any device including iPad, iPhone, Android devices, Microsoft Surface, GoPro, Garmin GPS, and even more.


    Flex Suction Demonstration

    The Sport Mount - Flex Suction construction:
    • The arm is comprised of three independent joints, all adjustable and lockable from a single, centrally located, control knob.
    • The control knob joint is adjustable to 360° and the two end joints are mini-ball heads that are adjustable to 105°.
    • The suction cup attachment joint is a lockable socket which rotates 220°.
    • The control knob allows partial loosening for safe and precise device positioning.
    • No longer limited to fixed length, limited rotation RAM arms.
    • Takes all of the guess work out of mount size selection and problems of imprecise positioning.

    The mount is portable and can easily fit in your flight bag or can be positioned and left on-board. Perfect for owners and renters alike.

    To position:
    2. Attach the Device Holder
    (Sold Separately) to the Sport Adapter.
    4. Fine tune iPad/Tablet positioning, tighten control knob.
    1. Position and lock the suction cup to the glass or smooth surface, tighten the control knob. Be sure the glass or surface is clean, the base of the suction cup is clean, and the suction cup attachment socket runs vertically to assure hold and minimize vibration. Tighten the suction cup socket and control knob

    3. Loosen the control knob, position the iPad/Device.


    About The Suction Cup:
    • This is a lift to lock suction cup mount with a multi-positional arm.
    • Made of true rubber, the suction cup is designed for years of use.
    • The lift to lock suction cup is easy to use.
    • The suction cup holds strong to any glass, plastic or similar smooth surface and provides a rigid and firm platform for positioning and holding the device.
    • Made out of a lightweight, high strength, composite material.

    Other details:
    • Arm Extension: 8.89 cm (3.5") to 26.67cm (10.5"),
    • Arm Diameter: 1.91cm (3/4"),
    • Arm Material: Aluminum,
    • Suction Cup Diameter: 8.89cm (3.5"),
    • Suction Cup Material: Sport Adapter Diameter: 3.81cm (1.5"),
    • Sport Adapter Material: Aluminum,
    • Mount Weight: 393g (13.8oz).

    Included components:

      Compact Suction Cup Base


      Flex Arm (Max. Extension - 26.67cm (10.5") | Min. Extension - 8.26cm (3.25")Generation 3 Sport Adapter




      More on MyGoFlight

      162,00€  Inc Tax
      MGF Flex Double Suction (MNT-1815)

      Sport Mount - Flex Double Suction

      Product Description
      Sport Mount - Flex Double Suction - an INFINITELY articulating and adjustable arm with the ability to hold any iPad or other device. There is no other suction cup mount for a iPad/Device that does all that this unit does in a single, light-weight, easy to configure mount.

      This one mount can operate as a compact suction cup, allowing a close position to the glass of 3.25 inches. It can also operate as a standard suction cup mount extending to 10.5 inches. The Mount utilizes two suction cups which some FAA examiners feel is important for added security and redundancy in a mount. For individuals looking for just one suction cup check out our Sport Mount - Flex Suction.

      Specifications:

      • Suction Cup Material - Rubber, plastic.
      • Sport Adapter Material - Aluminum.

      Features:
      PILOT INSTALLABLE
      Sport Mount - Flex Double Suction can be installed by any pilot in any aircraft.


      NO TOOLS REQUIRED
      Compact Suction can be installed onto any window or smooth surface with no tools.


      INFINITELY ADJUSTABLE
      Ball and socket ends and a ratcheting center provide infinite adjustment to height and position.

      360° ROTATION
      Rotate device between landscape and portrait positions in-flight when mounted.



      Flex Suction Demonstration

      The Sport Mount - Flex Suction construction:
      2. The suction cup attachment joint is a lockable socket which rotates 220°.4. The control knob allows partial loosening for safe and precise device positioning.
      1. The arm is comprised of three independent joints, all adjustable and lockable from a single, centrally located, control knob.3. The control knob joint is adjustable to 360° and the two end joints are mini-ball heads that are adjustable to 105°.

      To position:
      2. Attach the Device Holder
      (Sold Separately) to the Sport Adapter.
      4. Fine tune iPad/Tablet positioning, tighten control knob.
      1. Position and lock the suction cup to the glass or smooth surface, tighten the control knob. Be sure the glass or surface is clean, the base of the suction cup is clean, and the suction cup attachment socket runs vertically to assure hold and minimize vibration. Tighten the suction cup socket and control knob

      3. Loosen the control knob, position the iPad/Device.


      Other Details:
      • Arm Extension: 8.89 cm (3.5") to 26.67cm (10.5"),
      • Arm Diameter: 1.91cm (3/4"),
      • Arm Material: Aluminum,
      • Suction Cup Diameter: 8.89cm (3.5") Each,
      • Suction Cup Material: Sport Adapter Diameter: 3.81cm (1.5"),
      • Sport Adapter Material: Aluminum,
      • Weight: 535g (1 lbs. 2.7 Oz.).

      Included components:

        Double Suction Cup Base


        Flex Arm (Max. Extension - 26.67cm (10.5") | Min. Extension - 8.26cm (3.25")Generation 3 Sport Adapter




        More on MyGoFlight

        219,00€  Inc Tax
        MGF Flex Yoke (MNT-1820)

        Sport Mount - Flex Yoke

        Product Description

        MGF has quickly become the go to choice for pilots looking to mount their iPad and other electronics in the cockpit. MYGOFLIGHT has used their years of experience, proprietary technology, and the highest quality materials to develop the strongest and most versatile mounting solution on the market.

        The Flex Yoke has been designed to meet the needs of pilots and attaches to any yoke shaft or any other bar from 1.59cm (5/8") to 3.81cm (1.5") in diameter.

        Note: A MGF Device Holder is required to use this mount. If you do not already own one you can add one to your order of this mount.

        Features:
        20 g CERTIFIED
        Flex Suction was tested to withstand a 20 g impact. To view the test results Click Here.

        PILOT INSTALLABLE
        Flex Suction can be installed by any pilot in any aircraft. Use the quick release suction cup to securily mount to glass or any other smooth surface.

        INFINITELY ADJUSTABLE
        Ball and socket ends and a ratcheting center provide infinite adjustment to height and position.

        360° ROTATION
        Rotate device between landscape and portrait positions in-flight when mounted.


        QUICK CONNECT
        This mount comes with a Gen 3 Sport Adapter which quickly connects to any MYGOFLIGHT device holder. Press both green buttons to remove.
        MOUNT ANY DEVICE
        From iPad to GoPro this mount can securely hold any device including iPad, iPhone, Android devices, Microsoft Surface, GoPro, Garmin GPS, and even more.

        Flex Yoke Demonstration


        The Sport Mount - Flex Yoke construction:
        • The arm is comprised of three independent joints, all adjustable and lockable from a single, centrally located, control knob.
        • The control knob joint is adjustable to 360° and the two end joints are mini-ball heads that are adjustable to 105°. The yoke clamp has a quick release toggle clasp.
        • Fits yoke shafts from 5/8" to a maximum of 1 1/2" The control knob allows partial loosening for safe and precise iPad/Tablet positioning.
        • The control knob allows partial loosening for safe and precise device positioning.
        • No longer limited to fixed length, limited rotation RAM arms.
        • Takes all of the guess work out of mount size selection and problems of imprecise positioning.

        To position:
        • Position and lock the yoke clamp. Tighten the control knob on the flex arms.
        • Attach the Device Holder (Sold Separately) with device to the Sport Adapter
        • Loosen the control knob, position the device.
        • Tighten the yoke clamp.
        • Fine tune device positioning, tighten control knob.

        Other details:
        • Arm Extension: 8.89cm (3.5") to 26.67cm (10.5")
        • Arm Diameter: 1.91cm 3/4"
        • Arm Material: Aluminum
        • Yoke Clamp Expansion: Min. 1.91cm (3/4") or Max. 3.81cm (1 1/2")
        • Yoke Clamp Material: Plastic and Aluminum
        • Sport Adapter Diameter: 3.81cm (1 1/2")
        • Sport Adapter Material: Aluminum
        • Weight: 386 grams (13.6 Oz.)

        Included components:
        • Flex Yoke Base
        • Generation 3 Sport Adapter

        More on MyGoFlight

        162,00€  Inc Tax
        MGF Universal Cradle (MNT-1610)

        Sport - Universal Cradle

        Product Description
        THE ONLY FUTURE PROOF MOUNTING SYSTEM


        The Sport - Universal Cradle is designed to work with almost any tablet in virtually any case, or no case at all. As a mountable, it connects and easily rotates when paired with MGF Sport Mounts. The arms of the cradle are adjustable via quick release knobs making it easy to insert and remove your tablet. Weighing only 4 ounces the Universal Cradle is incredibly light-weight. No matter how you use it, the Sport Cradle meets the demands of pilots operating in extreme motion.

        Compatible with any tablet from 17.78cm (7 inches) to 27.94cm (11 inches):

        * The Universal Cradle is compatible with the NEW iPad Pro 10.5".

        Compatible with any protective case:

        Since the Universal Cradle adjusts to any size it is the only iPad/Tablet mounting solution that is Future Proof. This will be the last mounting solution you will ever have to purchase. It will adjust to fit any sized iPad or Tablet that you might purchase in the future.


        Compact Suction Features:
        COCKPIT READY
        Tablet secured, viewable, and operable with one hand during critical phases of flight as required by FAA.

        360° ROTATION
        Rotate tablet between landscape and portrait positions in-flight when mounted.


        QUICK MOUNT RING
        Allows for fast coupling and tablet rotation when used with Sport Mounts.

        SPORT MOUNT COMPATIBLE
        Cradle easily connects and rotates when paired with Sport Mounts.


        Other details:
        • Extended: 29.85cm (11 3/4")
        • Unextended: 16.51cm (6 1/2")
        • Weight: 124g  (4 Oz.)
        • Material: Aluminum, Rubberized Contact Points

        More on MyGoFlight
        162,00€  Inc Tax
        MGF Universal Cradle XL (MNT-1615)

        Sport - Universal Cradle XL

        Product Description
        THE ONLY FUTURE PROOF MOUNTING SYSTEM


        The Sport - Universal Cradle is designed to work with almost any tablet in virtually any case, or no case at all. As a mountable, it connects and easily rotates when paired with MGF Sport Mounts. The arms of the cradle are adjustable via quick release knobs making it easy to insert and remove your tablet. Weighing only 4 ounces the Universal Cradle is incredibly light-weight. No matter how you use it, the Sport Cradle meets the demands of pilots operating in extreme motion.

        Compatible with any tablet from 25.4cm (10 inches) to 33cm (13 inches):

        * The Universal Cradle is compatible with the NEW iPad Pro 10.5".

        Compatible with any protective case:


        Since the Universal Cradle adjusts to any size it is the only iPad/Tablet mounting solution that is Future Proof. This will be the last mounting solution you will ever have to purchase. It will adjust to fit any sized iPad or Tablet that you might purchase in the future.


        Compact Suction Features:
        COCKPIT READY
        Tablet secured, viewable, and operable with one hand during critical phases of flight as required by FAA.

        360° ROTATION
        Rotate tablet between landscape and portrait positions in-flight when mounted.


        QUICK MOUNT RING
        Allows for fast coupling and tablet rotation when used with Sport Mounts.

        SPORT MOUNT COMPATIBLE
        Cradle easily connects and rotates when paired with Sport Mounts.


        Other details:
        • Extended: 40cm (15 3/4")
        • Unextended: 26.67cm (10 1/2")
        • Weight: 142g (5 Oz.)
        • Material: Aluminum, Rubberized Contact Points

        More on MyGoFlight
        173,00€  Inc Tax
        MGF Universal Cradle Long Extensions (MNT-1611)

        Sport - Universal Cradle XL

        Product Description
        THE ONLY FUTURE PROOF MOUNTING SYSTEM


        The Sport - Universal Cradle is designed to work with almost any tablet in virtually any case, or no case at all. As a mountable, it connects and easily rotates when paired with MGF Sport Mounts. The arms of the cradle are adjustable via quick release knobs making it easy to insert and remove your tablet. Weighing only 4 ounces the Universal Cradle is incredibly light-weight. No matter how you use it, the Sport Cradle meets the demands of pilots operating in extreme motion.

        Compatible with any tablet from 10 inches to 13 inches:

        * The Universal Cradle is compatible with the NEW iPad Pro 10.5".

        Compatible with any protective case:


        Since the Universal Cradle adjusts to any size it is the only iPad/Tablet mounting solution that is Future Proof. This will be the last mounting solution you will ever have to purchase. It will adjust to fit any sized iPad or Tablet that you might purchase in the future.


        Compact Suction Features:
        COCKPIT READY
        Tablet secured, viewable, and operable with one hand during critical phases of flight as required by FAA.

        360° ROTATION
        Rotate tablet between landscape and portrait positions in-flight when mounted.


        QUICK MOUNT RING
        Allows for fast coupling and tablet rotation when used with Sport Mounts.

        SPORT MOUNT COMPATIBLE
        Cradle easily connects and rotates when paired with Sport Mounts.



        More on MyGoFlight
        39,00€  Inc Tax
        MGF Universal Cradle Short Extensions (MNT-1612)

        Sport - Universal Cradle

        Product Description
        THE ONLY FUTURE PROOF MOUNTING SYSTEM


        The Sport - Universal Cradle is designed to work with almost any tablet in virtually any case, or no case at all. As a mountable, it connects and easily rotates when paired with MGF Sport Mounts. The arms of the cradle are adjustable via quick release knobs making it easy to insert and remove your tablet. Weighing only 114g (4 ounces) the Universal Cradle is incredibly light-weight. No matter how you use it, the Sport Cradle meets the demands of pilots operating in extreme motion.

        Compatible with any tablet from 17.78cm (7 inches) to 27.94cm (11 inches):

        * The Universal Cradle is compatible with the NEW iPad Pro 10.5".

        Compatible with any protective case:
        Since the Universal Cradle adjusts to any size it is the only iPad/Tablet mounting solution that is Future Proof. This will be the last mounting solution you will ever have to purchase. It will adjust to fit any sized iPad or Tablet that you might purchase in the future.


        Compact Suction Features:
        COCKPIT READY
        Tablet secured, viewable, and operable with one hand during critical phases of flight as required by FAA.

        360° ROTATION
        Rotate tablet between landscape and portrait positions in-flight when mounted.


        QUICK MOUNT RING
        Allows for fast coupling and tablet rotation when used with Sport Mounts.

        SPORT MOUNT COMPATIBLE
        Cradle easily connects and rotates when paired with Sport Mounts.



        More on MyGoFlight
        27,00€  Inc Tax
        MGF GoPro®/Garmin Virb Adapter (MNT-1655)

        Sport - GoPro ®/Garmin Virb Adapter

        Combine the Sport - GoPro® Adapter with any MGF Sport Mount (Sold Seperately) to mount your GoPro® camera in your plane, boat, or anywehre else you desire.

        The Sport - GoPro® Adapter is made out of aircraft grade aluminum and works with any GoPro® camera. Capture all of your life moments on your GoPro® using the Sport - GoPro® Adapter.

        ** NOTE: This is just the cradle. Mounts and GoPro® camera both sold seperately.

        ** DISCLAIMER: This adapter is not intended for external use. Only use this adapter to mount your camera inside the cockpit. MGF is not responsible for lost or damaged GoPro or Garmin VIRB cameras that were mounted outside.

        Mounting your GoPro® with the Sport - GoPro® Adapter and MGF Flex Arms allows you the ability to position your GoPro® camera anywhere you would like. MGF Flex Arms are infinitely adjustable so you can mount your GoPro® camera anywhere and everywhere. Something that you are not able to accomplish with any other mounting system.

        Sport - GoPro ®/Garmin Virb Adapter Demonstration

        Sport - GoPro® Adapter works with all GoPro® models and all Garmin Virb models


        Other Details:
        • Hardware: Locking Screw, Plastic Washers
        • Weight: 57g (2 Oz.)
        • Material: Aluminum
        • Adapter Diameter: 3.81cm (1.5")

        More on MyGoFlight

        56,00€  Inc Tax
        MGF Phone Cradle (MNT-1650)

        Sport - Phone Cradle
        The Sport - Phone Cradle is designed to work with almost any smartphone in virtually any case, or no case at all. As a mountable, it connects and easily rotates when paried with MGF Sport Mounts. The arms of the cradle are adjustable via the adjustable knob making it easy to insert and remove your phone securely. No matter how you use it, the Sport - Phone Cradle meets the demands of pilots operating in extreme motion.

        Compatible with any smartphone as small as the iPhone 5 and as big as the iPhone 7 Plus (Minimum width = 5.72cm (2 1/4") | Maximum width = 10.16cm (4"))


        Compatible with any protective case

        Phone Cradle Features:
        COCKPIT READY
        Tablet secured, viewable, and operable with one hand during critical phases of flight as required by FAA.

        360° ROTATION
        Rotate tablet between landscape and portrait positions in-flight when mounted.


        QUICK MOUNT RING
        Allows for fast coupling and tablet rotation when used with Sport Mounts.

        SPORT MOUNT COMPATIBLE
        Cradle easily connects and rotates when paired with Sport Mounts.


        Other Details:
        • Extension: Min: 5.72cm (2.25"), Max: 10.16cm (4")
        • Weight: 54g (1.9 Oz.)
        • Material: Aluminum
        • Adapter Diameter: 3.81cm (1.5")

        More on MyGoFlight

        61,00€  Inc Tax
        MGF GPS Adapter (MNT-1660)

        Sport - GPS Adapter
        Sport - GPS Adapter is the perfect solution for mounting all Garmin Portable Avionics, as well as any other device that uses the AMPs hole pattern.

        The Sport - AMPs Adapter securely connects to all Garmin portables including the aera® 660, aera® 796, aera® 795, aera® 510 GPSMAP® 696, GPSMAP® 695, and more. Once the GPS Adapter is connected to the GPS you can quickly and securely mount the portable avionics using any MGF Sport Mount (Sold Separately).

        How To Attach Garmin Portable GPS:

        1. Screw GPS Adapter plate to the Garmin portable power cradle using the 4 included screws and lock nuts.2. Screw Sport Adapter onto GPS Adapter plate using the included screw.

        3. Connect Garmin portable power cradle to the Garmin device.


        4. Attach Garmin device to MYGOFLIGHT Sport Mount (Sold Separately).


        Other Details:

        • AMPs Dimensions: 4.45cm x 5.08cm (1 3/4" x 2")
        • Weight: 71g (2.5 Oz.)
        • Material: Aluminum

        More on MyGoFlight

        56,00€  Inc Tax
        MGF Kneeboard iPad Pro/Air (KNE-1226)
        iPad Sport Case (Kneeboard/Mountable)

        iPad version:
        • iPad (9.7") and iPad Pro 9.7
        • iPad Air 1/2

        Product Demonstration


        The iPad Kneeboard Sport™ is the perfect aviation kneeboard, mount and everyday case for the iPad Mini 4. It is designed for the pilot looking to secure their iPad on either leg, who needs the minimal case, but still wants a very secure fit, or for the pilot that wants to mount their iPad.

        In black, smooth polycarbonate, the Sport™ adds protection and great feel to the iPad. The iPad Kneeboard Sport™ was designed for pilots by pilots.

        It is designed to work in aircraft where space is tight or where there is a cyclic, or control stick being used between the legs. It is perfect for pilots of helicopters, sport aircraft, and when there is tight yoke clearance or when mounting is desired.

        NOTE: This is the iPad Kneeboard only. Mounts sold separately.

        COCKPIT READY
        iPad secured, viewable, and operable with one hand during critical phases of flight.
        iPAD KNEEBOARD
        Secure your iPad on either leg for use with either hand.
        QUICK MOUNT RING
        Allows for fast coupling and iPad rotation when used with MGF Sport Mount.


        SPORT MOUNT COMPATIBLE
        Case easily connects and rotates when paired with MGF Sport Mounts.



        360° ROTATION
        Rotate iPad between landscape and portrait positions in flight when mounted.

        MULTI-USE
        Take your iPad from air to office to home, eliminating the inconvenience and cost of using more than one case.

        SMART COVER COMPATIBLE
        Use with an Apple Smart Cover for the complete iPad Kneeboard case.






        Other Details:
        • Dimensions (L x W X D): 24.77cm x 19.69cm x 1.6cm (9.75" x 7.75" x .63")
        • Kneeboard/Lapboard: Yes/No
        • Mountable: Yes
        • Material: Polycarbonate
        • Colors & Finish: Black with soft rubber coatin
        • Port Access: All ports accessible
        • Clipboard: No
        • Aluminum Rails On Back: Yes with rubber feet
        • Leg Strap: Yes
        • Case Skin Option: No
        • Apple Smart Cover Compatible: Yes


        More on MyGoFlight
        140,00€  Inc Tax
        MGF Kneeboard iPad Mini 4 (KNE-4030)
        iPad Sport Case (Kneeboard/Mountable)

        iPad version:
        • iPad mini 4

        Product Demonstration


        The iPad Kneeboard Sport™ is the perfect aviation kneeboard, mount and everyday case for the iPad Mini 4. It is designed for the pilot looking to secure their iPad on either leg, who needs the minimal case, but still wants a very secure fit, or for the pilot that wants to mount their iPad.

        In black, smooth polycarbonate, the Sport™ adds protection and great feel to the iPad. The iPad Kneeboard Sport™ was designed for pilots by pilots.

        It is designed to work in aircraft where space is tight or where there is a cyclic, or control stick being used between the legs. It is perfect for pilots of helicopters, sport aircraft, and when there is tight yoke clearance or when mounting is desired.

        NOTE: This is the iPad Kneeboard only. Mounts sold separately.

        COCKPIT READY
        iPad secured, viewable, and operable with one hand during critical phases of flight.
        iPAD KNEEBOARD
        Secure your iPad on either leg for use with either hand.
        QUICK MOUNT RING
        Allows for fast coupling and iPad rotation when used with MGF Sport Mount.


        SPORT MOUNT COMPATIBLE
        Case easily connects and rotates when paired with MGF Sport Mounts.



        360° ROTATION
        Rotate iPad between landscape and portrait positions in flight when mounted.

        MULTI-USE
        Take your iPad from air to office to home, eliminating the inconvenience and cost of using more than one case.

        SMART COVER COMPATIBLE
        Use with an Apple Smart Cover for the complete iPad Kneeboard case.






        Other Details:
        • Dimensions (L x W X D): 20.32 x 13.48 x 0.61 cm (8.0 x 5.31 x 0.24 in)
        • Kneeboard/Lapboard: Yes/No
        • Mountable: Yes
        • Material: Polycarbonate
        • Colors & Finish: Black with soft rubber coatin
        • Port Access: All ports accessible
        • Clipboard: No
        • Aluminum Rails On Back: Yes with rubber feet
        • Leg Strap: Yes
        • Case Skin Option: No
        • Apple Smart Cover Compatible: Yes


        More on MyGoFlight
        140,00€  Inc Tax
        Compact Suction - Universal iPad/Tablet Mount Kit (UMK-1812)
        Compact Suction - Universal iPad/Tablet Mount Kit
        The Compact Suction - Universal iPad Mount Kit is for pilots who want to mount their iPad or other device off a glass windshield or other smooth surface while using the least amount of space. This is especially useful when using the mount on a side window close to the pilot. Each of these mounts comes with a Generation 3 Sport™ Adapter. The adapter can tilt up to 90 degrees.

        The Compact Suction - Universal iPad Mount Kit is the most versatile mounting solution for pilots that would like to install an device on almost any flat, smooth surface. The high strength suction cup twist and locks to provide a secure hold to the windshield or metal panel. For pilots looking for more articulation and distance from the iPad to the mounting surface, please check out the Sport Mount - Flex Suction.

        The mount is portable and can easily fit in your flight bag or can be positioned and left on-board. Perfect for owners and renters alike.

        The greatest advantage that this Universal iPad Mount Kit offers is the ability to mount any size iPad or Tablet from as small as the iPad Mini to as big as the iPad Pro. Attach the larger clips (included) onto the Universal Cradle to mount your iPad or Tablet while keeping it in a protective case.

        Since the Universal Cradle adjusts to any size it is the only iPad/Tablet mounting solution that is Future Proof. This will be the last mounting solution you will ever have to purchase. It will adjust to fit any sized iPad or Tablet that you might purchase in the future.

        Compact Suction Features:
        PILOT INSTALLABLE
        Sport Mount - Compact Suction can be installed by any pilot in any aircraft.


        NO TOOLS REQUIRED
        Compact Suction can be installed onto any window or smooth surface with no tools.


        360° ROTATION
        Rotate iPad/Device between landscape and portrait positions in-flight when mounted.






        Compact Suction Construction:
        2. Made of true rubber, the suction cup is designed for years of use.4. Made out of a lightweight, high strength, composite material.
        1. This is a lift to lock suction cup mount with a multi-positional arm.3. Holds strong to any glass, plastic or similar smooth surface and provides a rigid and firm platform for positioning and holding the device.



        To position:
        1. Press suction cup against smooth surface, press center button and lift lever to lock.2. Loosen the suction cup knob, position mount location, then tighten.3. Loosen sport adapter knob, position adapter to desired location of device, then tighten.4. Attach the Universal Cradle (Included) to the Sport Adapter.



        Included components:
        Compact Suction Cup Base

        Generation 3 Sport Adapter

        Sport - Universal Cradle
        (Please Select Cradle Version)


        Specifications:

        • Suction Cup Material - Rubber, plastic
        • Sport Adapter Material - Aluminum
        • Sport - Universal Cradle Material - Anodized Aluminum


        More on MyGoFlight

        311,00€  Inc Tax
        Per Page      1 - 20 of 23